575087
16
Zoom out
Zoom in
Previous page
1/284
Next page
14
English
Set ID Name
ID name appears on other units’ displays when you make
an All Call or Direct Call. This is also the name that appears
on other radio displays when someone wants to make a
Direct Call to you. When no ID name is set, the unit number
appears.
To set the ID Name:
1. Enter the MENU/GRP. Advance through the Menu until
"NAME" is displayed. Press OK to enter the Name on the
blinking sub-code segments.
2. Press the or key to input the character on the
blinking sub code segments. Press OK to move to the
next character until completed the desired characters.
The name characters can be selected up to 4 characters.
3. Press OK to confirm the setting.
Note:Whenever the user presses MENU/GRP key, the
unit cancels input ID number and entered ID
name then it exits from Group menu.
Set ID number
Each radio in your group needs to be set to an ID number
from 1 to 16.
The ID number is required to distinguish units of the same
Group.
To set the ID number:
1. Enter the MENU/GRP. Advance through the Menu until
"ID" is displayed. Press OK then press the or key
to set the ID number.
2. Press OK to confirm the setting.
Note:The user selects ID number that is displayed on
channel segments by pressing the or key.
When the registered ID of All Call is selected by
pressing or the LCD indicates "USED" at
sub-code segments, and if non registered ID is
selected it indicates nothing at sub-code
segments.
Set Monitor in Group mode
To set the Monitor mode ON:
1. Enter the MENU/GRP. Advance through the Menu until
the "MON" display. Press OK then press the or
key to set the Monitor to ON mode.
2. Channel monitoring will start immediately.
To set the Monitor to OFF:
1. Enter the MENU/GRP. Advance through the Menu until
"MON" display. Press OK then press the or key to
set the Monitor to OFF.
2. Press OK to confirm the setting.
T8_EN.fm Page 14 Thursday, September 16, 2010 12:01 PM
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Motorola TLKR T8 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Motorola TLKR T8 in the language / languages: All languages as an attachment in your email.

The manual is 10,83 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info