Manual Motorola Talkabout T82 EXTREME (page 9 of 184) (All languages)

762156

Zoom out

Zoom in

1/184

English

and Sub-Code settings from the Leader’s radio. All Members’

radios will remain in this mode for 3 minutes.

• A group with many radios should have all users take this step at the

same time, so all radios can be programmed in one go.

3. On the Leader’s radio, press and hold down the button

until you hear a double beep.

Note:

• At the double beep, this radio’s Channel and Sub-Code settings

will be transmitted, which will be received and copied by all the

other (Members’) radios.

• The Leader’s radio must make this transmission when all the

Members’ radios are still in the Easy Pairing mode, otherwise the

transmission will not be picked up.

• On the Leader’s radio, user must remember NOT to release the

button on the first (single) beep, otherwise this radio will become

another Member’s radio. If that happens, you can press PTT to

escape, and retry the steps described in #3 again.

• If the Leader’s radio is set to a channel between 9 and 16, please

ensure that all Members’ radios have channels 9 to 16 activated.

• When a Member’s radio with only 8 Channels is being Easy-

Paired by a Leader’s radio on Channel 9 or above, Easy-Pairing

will fail, indicated by three short beeps, and “Err” is displayed

briefly.

Internal Voice Operated Transmission/

Voice Operated Transmission ( / )

Transmission is initiated by speaking into the microphone of

the radio/audio accessory instead of pushing the PTT

button.

1. Press Menu until the icon appears on the

display. When audio accessory is connected, the

icon will be shown. The current setting (Off, L1–L3) will

flash.

2. Press or to select the sensitivity level.

3. Press the PTT button to exit menu or Menu to continue

set up.

Note: When using iVOX/VOX, there will be a short delay.

Dual Channel Monitor

Enables you to scan the current channel and another

channel alternately.

To set another channel and start Dual Channel Monitor:

1. Press Menu until the Dual Channel Monitor icon

appears. The Dual Channel Monitor icon will flash.

2. Press or to select the channel then press Menu.

3. Press or to select the Sub-Code.

4. Press the PTT button or wait until time out to activate

Dual Channel Monitor. The screen will alternate between

home channel and Dual Channel Monitor channel.

5. To end Dual Channel Monitor, press Menu.

Note: If you set the same channel and Sub-Code as the current channel,

Dual Channel Monitor does not work.

Silent Mode (Vibrate Alert)

Silent Mode (Vibrate Alert) notifies you that your radio is

receiving a message. This is useful in noisy environments.

The Vibrate Alert will be triggered when you received a call.

It will then only be triggered again if there is no activity within

30 seconds after the previous call.

1. Press Menu until the Vibrate Alert icon is displayed.

The current setting will flash.

L3 = High Sensitivity for quiet environments

L2 = Medium Sensitivity for most environments

L1 = Low Sensitivity for noisy environments

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Motorola Talkabout T82 EXTREME in the language / languages: All languages as an attachment in your email.

The manual is 60,71 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Motorola Talkabout T82 EXTREME Manual

Product: