750825
9
Zoom out
Zoom in
Previous page
1/176
Next page
7
English
Set Group Code
1. Press or to choose the Group Code.
2. Press SEL/ to complete Group Code setting.
3. The radio enters “Ring Tone Setting Menu
4. Press MENU/GRP to go back to Group Menu.
Set Ring Tone
The user selects Ring Tone for a Direct Call. Ring Tones are the
same as Call Tones.
1. Press or to select a Ring Tone.
2. The selected Ring Tone sounds.
Set ID
Each radio in the group needs to be set with an ID. The user
can set an ID name of up to four (4) characters.
1. Press or to select an ID number.
2. If the ID is already taken, USED is seen. If USED is not
shown, then the ID is available.
3. Press SEL/ to advance to setting ID Name.
Set ID Name
The ID Name appears on the other radio’s display when you
make an All Call or a Direct Call. The ID Name also appears on
the other radio’s display when they are placing a Direct Call.
When no ID name is set, the unit number appears.
1. Press or to select a character that blinks on the
display.
2. Press SEL/ to select and move to the next character.
3. Press SEL/ to register the ID number and ID Name.
Note: The radio cancels selected ID Number and entered ID
Name, then exits from Group Menu when MENU/GRP
button is pressed.
Channel Setting in Group Mode
To set Auto Channel Change in Group Mode:
1. Press MENU/GRP to enter Group Mode.
2. Press SEL/ to enter Channel Setting.
3. Press or to “Auto Channel Change Setting”.
4. Press SEL/ to select.
A channel number blinks and “ALL” is seen.
5. Press or to select the channel.
6. Press SEL/ or to transmit Auto Channel Change
command.
7. Press MENU/GRP to return to Channel Setting in Group
Mode.
To set Manual Channel in Group Mode:
1. Press MENU/GRP to enter Group Mode.
2. Press SEL/ to enter Channel Setting.
3. Press or to “Manual Channel Setting”.
4. Press SEL/ to select.
A channel number blinks and “MY” is seen.
5. Press or to select the channel manually.
6. Press SEL/ to exit from Manual Channel setting.
7. Press MENU/GRP to return to Channel Setting in Group
Mode.
Set All Call
1. Press MENU/GRP to enter Group Mode.
2. Press to enter All/ Direct Call Setting.
3. Press or to select All Call Transmission. “SYNC” is
seen.
4. Press SEL/ or to exit this setting and transmit All Call.
All Call Tone sounds. and blinks while transmitting.
68015000918.book Page 7 Thursday, January 12, 2017 2:47 PM
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Motorola T81 Hunter at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Motorola T81 Hunter in the language / languages: All languages as an attachment in your email.

The manual is 51,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info