R331 Rechargeable Remote Control
8. Learning Commands
1. Press and hold the mode key (TV, DVD, or AUX) on the Motorola remote and while
holding it pressed, press the LEARN key for one second then release both keys.
2. All of the mode keys will flash and then the selected mode key light remains on.
3. On your Motorola remote, press and release the key that you want to teach.
4. While pointing your original remote at the bottom of your Motorola TV Easy Find
Remote Control, approximately 1 inch apart, press and hold the original remote key until
the mode key light blinks once and stays on. (If there is a learning problem, the mode key
light blinks for three seconds and stays on. If this happens, repeat steps 3 and 4 above.)
5. Repeat steps 3 and 4 above for each key you want your Motorola TV Easy Find Remote
Control to learn.
Press and release the LEARN key when all desired remote commands have been learned.
If you have encountered difficulties with the LEARN key setup, please refer to Section M:
Troubleshooting Learning.
NOTE: It is not necessary to have your Motorola TV Easy Find Remote Control learn
every key from your original remote since most of the keys will not be used under normal
daily use. The best practice is to teach only the keys that help you navigate for the best
experience, like your volume up and down, channel up and down, and DVR functions.
9. Clearing Commands
A. To Clear all Learned Commands (under a single mode)
1. Press and hold the mode key (TV, DVD, or AUX) and while holding it pressed, press the
LEARN key for one second then release both keys.
2. All the mode keys will flash and the selected mode key light will stay on.
3. Press and release the LEARN key once. The mode key light blinks off.
4. Press and release the DELETE key. The mode key light turns off. All learned
Commands under that mode are now cleared.
B. To Clear all Learned Commands (under ALL modes)
1. Press and hold the mode key (TV, DVD, or AUX) and while holding it pressed, press the
LEARN key for one second then release both keys.
2. All the mode keys will flash and the selected mode key light will stay on.
3. Press and release the LEARN key twice. The mode key light blinks off.
4. Press and release the DELETE key. The mode key light turns off. All learned
Commands in the remote are now cleared.