812758
14
Zoom out
Zoom in
Previous page
1/21
Next page
14
5. Help
The power / linking LED Indicator on the parent unit does not turn on.
Check whether the parent unit is powered on.
Check whether the batteries are correctly installed and not drained.
Connect the parent unit to the power supply to recharge it.
The power / linking LED indicator on the parent unit flashes.
The parent unit and the baby unit may be out of range with each other.
Reduce the distance between the units. Make sure the distance between
the parent unit and baby unit is within the operating range.
The baby unit may be powered o. Press and hold on the baby unit to
power it on.
Unable to hear the sound or baby cry from the parent unit.
The volume level in the parent unit may be set too low. Increase the volume
level of the parent unit. Refer to section 4.3 for volume level settings.
The parent unit and the baby unit may be out of range with each other.
Make sure the distance between the parent unit and baby unit is within the
operating range.
The Digital Audio Baby Monitor system produces a high-pitched noise.
The parent unit and the baby unit are too close with each other. Move the
baby and parent units further apart. Make sure the distance between the
parent unit and baby unit is within the operating range.
The speaker volume of the parent unit may be set too high. Decrease the
volume of the parent unit. Refer to section 4.3 for volume level settings.
Powered by non-rechargeable batteries.
If for any reason the Ni-MH batteries are lost and you would like to use the
baby monitor, you can install AAA size non-rechargeable batteries, such as
alkaline batteries, to power your baby monitor. In this case, make sure the AC
power adapters are not connected to the units for charging.
The parent unit and the baby unit keep losing connection.
The parent unit and the baby unit may lose connection with each other. You
can try to pair them again by following the procedures below:
power o both the parent unit and the baby unit.
press and hold on the parent unit and the baby unit for more than 9
seconds at the same time.
release the power button when the green LED quickly flashes.
when the green LED stays on green, the pairing process is successful and
the units are connected to each other.
For more support, you can reach us at: motorolanursery.com/support or
+1-800-763-2207 (United States and Canada).
Help
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Motorola PIP12 TRAVEL at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Motorola PIP12 TRAVEL in the language / languages: English as an attachment in your email.

The manual is 0.93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Motorola PIP12 TRAVEL

Motorola PIP12 TRAVEL Quick start guide - English - 16 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info