779580
30
Zoom out
Zoom in
Previous page
1/35
Next page
30
19 Troubleshooting
Operation by battery
If the power cord is not plugged into the base unit, and the battery is available the unit will
enter Battery Operation Mode. The Battery Operation Mode is designed to allow users to
continue use of the phones during a power outage and is not intended for prolonged use.
Low Battery
shows in the display
The 5 AAA batteries need replacing or are improperly installed or not installed at all.
No dial tone
Check or repeat installation steps.
Make sure the base power cord is connected to a working electrical outlet. Make sure the
telephone line cord is connected to the base and the wall jack.
Make sure the telephone handset cord is connected to the phone and to the headset. Make
sure the cord is not damaged.
Make sure the hook switch pops up when the handset is lifted.
Check the s button. Make sure the indicator is o.
Disconnect the base station from the wall jack and connect another phone to the same
jack. If there is no dial tone in the second phone, the problem might be your wiring or
local service.
Dial tone is ok, but can’t dial out
Make sure the base station is set to the correct dial mode.
Phone does not ring
Make sure the ringer is turned on.
Make sure the Do Not Disturb feature is not activated.
You may have too many extension phones on your line. Try unplugging some phones.
See solutions for ‘No dial tone’.
If the phone is an extension, make sure the phone is properly registered with the Motorola
ML1000 base.
You cannot be heard by the other party
Make sure the Mute feature is not turned on.
Make sure the handset or headset cord is inserted properly and securely.
Incoming voice too low or none at all
Check volume setting.
You experience static, noise, or fading in and out
Make sure the base station is not plugged into an electrical outlet with another household
appliance. If necessary, relocate the base.
Memory / Directory dialing doesn’t work
Did you program the memory location keys correctly?
Make sure the phone number is formatted properly.
No Caller ID
You must subscribe to the standard Name/Number Caller ID service from your local
telephone company to receive CID information.
No display
Make sure the unit is connected to a non-switched electrical outlet. Disconnect the power
adaptor from the base and reconnect it.
30


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Motorola ML1100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Motorola ML1100 in the language / languages: English as an attachment in your email.

The manual is 1.44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info