779580

Motorola ML1100 Manual

19
Zoom out
Zoom in
Previous page
1/35
Next page
19
2. Using the navigation button, move the indicator to
Factory Reset
. Press
Select
softkey.
3. Move the indicator to
Yes
and press
Select
softkey. Confirm the action once more and the
phone will reboot with the default settings.
NOTE
This will erase records in call history, phonebook, all greetings and all messages in the memories.
10 Basic Operation
Your phone provides the convenience of accessing four separate telephone lines, each having
its own phone number. It can have up to ten telephones or cordless handsets sharing multiple
lines. Each station is interconnected to all others via intercom.
10.1 Making Calls with the Handset
1. Pick up the handset and the phone automatically selects the priority line. If the priority
line is in use, it will select the next open line or you may select a line by pressing the
corresponding LINE button.
2. Wait for the dial tone, then dial a phone number.
3. Hang up the handset when finished.
10.2 Making Calls with the Speakerphone
1. Press s and the phone automatically selects the priority line. If the priority line is in use, it
will select the next open line or you may select a line by pressing the corresponding
LINE button.
2. Wait for the dial tone, then dial a phone number.
3. Press s when finished.
10.3 Making Calls with the Optional Headset
1. Connect the headset plug into the headset jack on the right side of the base.
2. Adjust the headset so the microphone is approximately 2 to 3 inches away from
your mouth.
3. Press h and the phone automatically selects the priority line. If the priority line is in use, it
will select the next open line or you may select a line by pressing the corresponding
LINE button.
4. Wait for the dial tone, then dial a phone number.
5. Press h when finished.
NOTE
The Motorola multi-line phone system will work with most telecom headsets that have a 2.5mm
headset jack.
10.4 Pre-Dialing
1. With the phone idle and the handset in the cradle, manually enter the telephone number.
The number will show in the display.
2. Press
Dial
softkey, s or lift the handset to take a line and the number will automatically be
dialed. Press
Clear
softkey to delete the previous digit or
Home
softkey to cancel the call
before dialing.
10.5 Answering Calls
When receiving an incoming call, you may:
1. Pick up the handset.
2. Press s.
3. Press h.
… 19 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Motorola ML1100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Motorola ML1100 in the language / languages: English as an attachment in your email.

The manual is 1.44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info