779579

Motorola ML1000 Manual

20
Zoom out
Zoom in
Previous page
1/35
Next page
20
4. Press LINE button corresponding to the line the incoming call is on. This will activate
speakerphone mode.
5. When finished, hang up the handset, press s or h.
10.6 Switching Between the Speakerphone, Handset and Headset
1. To switch to the speakerphone, press s. Replace the handset in the cradle.
2. To switch to the handset, lift it out of the cradle. The speakerphone or headset mode will
switch o automatically.
3. To switch to the headset, make sure your headset is plugged into the headset port and
press h. Replace the handset in the cradle.
10.7 Mute
If you are on an active call and do not wish the other party to hear you, use the Mute feature.
You will still, however, be able to hear them.
1. Press m to toggle the feature. The indicator light on the button will stay lit for as long as
the call is muted.
2. Press m again to unmute the call.
10.8 Inserting a Pause in the Dialing Sequence
Press j twice to insert a delay in dialing sequence when a pause is needed to wait for a dial
tone (for example, after you dial 9 for an outside line, or to wait for a computer access tone).
Each pause counts as one digit in the dialing sequence, and is shown as
P
in the display.
10.9 Do Not Disturb (DND)
This feature will disable your telephone's ringer for a set period of time to prevent incoming
calls from interrupting. When an incoming call or intercom call occurs, the status indicators
will light up but the phone will not ring.
1. Press DND when the phone is in idle mode.
2. Using u and d of the navigation button, choose the duration you wish to remain
undisturbed. You may select as short as 15 minutes or as long as 24 hours. After that time
expires, the phone will automatically turn o the DND feature.
3. Press
Select
softkey to enable DND for your chosen duration. A DND timer will toggle on
the display indicating how much time remains before the DND feature is automatically
turned o. DND can be cancelled manually at any time by pressing DND button again.
10.10 Line Privacy
This feature, when enabled, will prevent other phones on the same system from accessing the
line used by your active call.
1. Press
Menu
softkey while in idle mode.
2. Using the navigation button, move the indicator to
Phone Settings
. Press
Select
softkey.
3. Move the indicator to
Line Privacy
and press
Select
softkey.
4. Choose either
On
or
O
and press
Select
softkey.
11 Hold
11.1 Placing a Call on Hold
When on an active call, press HOLD to put the line in use on hold. The line indicator for the
held line will flash red on each phone on the system. The caller will hear either your Music on
Hold selection or a reminder beep, letting them know the call is still connected.
… 20 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Motorola ML1000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Motorola ML1000 in the language / languages: English as an attachment in your email.

The manual is 1.44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info