751055
62
Zoom out
Zoom in
Previous page
1/69
Next page
How to Tell if Your Clients Support WPA2
You can check to see if all other clients that you plan to put on the network
support WPA2. You can do this by checking the manual that came with each
device or by checking the configuration software for the installed device.
Look under Security or Encryption or Setup or Advanced Features.
How to Configure Wireless Security for a RADIUS Server
If you have a Radius Server, select the WPA/WPA2 options without PSK.
To enable WPA and WPA2 without PSK, follow these steps:
1 Under 802.11n Mode Enable/Disable, select Disable from the
pulldown.
2 Find the WPA-PSK Security Settings tab. If WPA-PSK is Enabled, select
Disabled from the WPA-PSK pulldown and click Save. (Note that
WPA-PSK is Disabled by default).
3 If WPA2-PSK is Enabled, select Disabled from the WPA2-PSK pulldown
and click Save. . (Note that WPA2-PSK is Enabled by default).
4 Select Enabled for WPA2. Do not click Save yet.
5 Enter the RADIUS Server Address and click Save.
6 Enter the RADIUS Port and click Save.
7 Enter the RADIUS Key and click Save.
8 If you want to enable WPA, select Enabled for WPA, and click Save.
9 If you want to enable WPA2, make sure Enabled is selected for WPA2,
and click Save.
10 If you want to disable WPA2, select Disabled for WPA2, and click Save.
11 Under Encryption, if you have enabled WPA, or WPA and WPA2, select
AES+TKIP. If you have enabled WPA2 only, select AES only.
12 Click Save.
62


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Motorola MG7540 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Motorola MG7540 in the language / languages: English as an attachment in your email.

The manual is 2,95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info