35
Base Station Settings
36
Base Station Settings
Press the or as often as necessary to select the DEREGISTER submenu.
Press the key.
Enter the PIN. Note: (Factory setting is 0000).
Press the key.
If necessary, use the or key to select the handset.
Press the key.
Press the key to confirm the setting.
3.
4.
5.
6.
7.
8.
9.
Changing the PIN
Press the key as often as necessary until the BASE menu appears.
Press the key.
Press the or as often as necessary to select the CHANGE PIN submenu.
Press the key.
Enter the old PIN (0000).
Press the key.
Enter the new PIN (e.g. 1111).
Press the key.
Enter the new PIN again (e.g. 1111).
Press the key to confirm the setting.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
Restore Base Settings
Press the key as often as necessary until the BASE menu appears.
Press the key.
Press the or as often as necessary to select the required DEFAULT submenu.
1.
2.
3.
If several handsets are registered on one base station, they can deregister each other
mutually. The last handset cannot be deregistered.
Deregister Handset
Press the key as often as necessary until the BASE menu appears.
Press the key.
1.
2.
1. Press the key repeatedly until BASE appears.
2. Press the key.
3. Press or key to select DIAL MODE.
4. Press the key.
5. Press or key to select TONE or PULSE.
6. Press the key to confirm the setting.
Select Dial Mode
5. Enter the 4-digit PIN code (pre-set code 0000).
6. Press the key, "CONFIRM?" appears.
7. Press the key again to confirm.
Press the key.4.
Default Settings
E.G. PIN NO - 0000
DIAL MODE - TONE
FLASH TIME - 100 / 250 / 600
EMERGENCY NO - EMPTY
BARRING - EMPTY
