7790
7
Zoom out
Zoom in
Previous page
1/35
Next page
ME4051 user guide english non UK --- Pg 12
12
Installation
ME4051 user guide --- Pg 11
11
Installation
Open the battery compartment by pushing
upwards on the battery compartment cover. Insert
AAA-type batteries, observing the correct polarity.
+
+
_
_
Inserting the Batteries / Attaching the Belt Clip
Replace the cover on the battery compartment and push it upwards
until it clicks into place. Place the handset in the base station.
A confirmation beep and the charging indicator confirm that charging has begun.
Note: When used for the first time, allow the batteries to charge for at least 14 hours
without interruption. If possible, only take the handset out of the base station when
the charging process has ended. This will help to guarantee optimum operation.
Attach the belt clip by pushing it into the opening provided on the rear of the housing.
The clip will bend slightly until it clicks into place.
The mobile handset will not operate
if the batteries are inserted incorrectly.
There is also a possibility that the
handset may be damaged thereby.
Insert the plug of the mains adaptor in the
socket on the underneath of the charger unit.
Plug the mains adaptor into the mains socket.
The charger unit is now ready to use.
Connecting the Charger Unit
The base station does not
have a power switch. Make
sure that there is a mains
socket nearby and that the
mains adaptor is easily
accessible. Check that the
voltage indicated on the
mains adaptor corresponds
to that of your mains
current.
Insert the plug in the corresponding socket of the base station (it is not possible to
mix them up as the socket and plug are designed to be reverse-polarity protected).
Route the cable beneath the telephone towards the back. Insert the plug into the
socket of the telephone plug of your telephone connection. Insert the mains adaptor
in the wall socket. The base station is now ready for use.
Do not expose the base station and charger unit to direct sunlight. Do
not allow the base station and charger unit to become wet. They should
not be set up in rooms which are subject to condensation or corrosive
steam or a high concentration of dust (e.g. cellars, garages or
conservatories). The room temperature must be between 0
0
C and 35
0
C.
Connecting the Base Station and Mains Adaptor
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Motorola ME4051 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Motorola ME4051 in the language / languages: English as an attachment in your email.

The manual is 2,83 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Motorola ME4051

Motorola ME4051 User Manual - German - 31 pages

Motorola ME4051 User Manual - Dutch - 31 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info