779613
25
Zoom out
Zoom in
Previous page
1/28
Next page
24
Solution: Dashboard may need to be refreshed to see the flood
icon. Make sure the flood cable is plugged in snugly to the
MultiSensor, and that the exposed metal contacts of the flood
cable are positioned where they will be exposed to water from
flooding. Double-check flood alert settings. Check the cable by
shorting between the two exposed metal contacts. If the device
doesn't trigger a report of flooding within 30 seconds, there may
be a problem with the cable. It should be replaced.
Problem: Not sending alerts via text (or email, phone)
Possible causes: Alert not enabled, threshold not configured
properly, Alert Recipient not configured properly
Solution: Recheck all alert settings, including whether the
expected alert is enabled, threshold settings, whether alert
recipients have been successfully selected, and details to contact
alert recipients.
Problem: Device not responding to Refresh or Reset, or
generating error message
Possible causes: Device not online, delayed communication with
device
Solution: Under poor signal conditions, you may need to wait up
to several minutes for the commands to take effect. If the device is
not online, check that it has power. You may need to move your
device to find a better signal.
Problem: Dashboard doesn’t display current data
Possible causes: Dashboard doesn’t refresh on its own
Solution: Tap the device icon to see the latest reported data. Tap
Refresh to generate a new report.
NOTE: Normally the device reports every 20 minutes. If you tap
the device icon at the top of the dashboard, the dashboard will
show you data from the most recent report. If you tap the Refresh
button, the device will send a fresh report.
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Motorola MC4000 - cellular multisensor at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Motorola MC4000 - cellular multisensor in the language / languages: English as an attachment in your email.

The manual is 2.29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info