504527
38
Zoom out
Zoom in
Previous page
1/81
Next page
Installation 3-15
DCT5100 Installation Manual
When multiple OOB frequencies are used, the DCT5100 pauses 40 seconds on each valid
frequency. The LED displays dl and a progress indicator, which identifies a software object
download. The progress indicator, or crawling ant, moves one position around the dl display
for each segment of download received. If the dl stops moving up and down on the LED for
an extended period of time, contact the headend operator.
The progress indicator usually moves at a consistent rate as segment downloads are
received. If all the segments are retrieved in the first pass, the EF, AU and FP messages are
displayed on the LED. If segments are dropped, the progress indicator appears to stall and
then inch forward after the dropped segments are retired.
When the progress indicator alternates between rapid and sluggish movement, this may
indicate that the stream is spinning too fast for existing plant conditions.
The LED displays EF for up to 60 seconds when the software object download is complete
during flash erasure and then displays FP for up to 60 seconds during flash programming.
The DCT5100 is ready for initialization by the headend controller when the LED display is
blank. Verify that the DCT5100 is powered up or reset within two minutes of a completed
download.
Boot Cycle Error Codes
If hardware or software problems occur, the DCT5100 displays error codes on the LED display.
Table 3-2 is a list of error codes that can occur during boot cycle startup:
Table 3-2
Error codes at boot cycle startup
Error
Code
Description When error occurs Action Required
Eb 01
Object failed validation After the LED displays dl, indicating
validation check failed
Contact headend
operator
Eb 02
Download time-out After cycling twice through the OOB
frequencies
None
Eb 03
Flash erase failed After software object download complete
and EF is displayed
Replace DCT5100
Eb 04
Flash programming
failed
After software object download complete
and FP is displayed
Contact headend
operator
Eb 05
Invalid DLC frequency After the LED displays dl, indicating
validation check failed
Contact headend
operator
Eb 06
Hardware initialization
failed
After plugging the DCT5100 into an
electrical outlet to begin the boot cycle
Replace DCT5100
Eb 07
Object failed validation After software object download complete
and FP is displayed
After a successful software object
download and DCT5100 is reset
Contact headend
operator
No action required
because DCT5100
repeats software object
download process
Eb 08
Reserved None
38


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Motorola DCT5100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Motorola DCT5100 in the language / languages: English as an attachment in your email.

The manual is 1,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Motorola DCT5100

Motorola DCT5100 User Manual - English - 58 pages

Motorola DCT5100 User Manual - English - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info