504457
42
Zoom out
Zoom in
Previous page
1/44
Next page
DCT6400 Series User Guide
35
Problem Possible Solution
There are no
graphics, closed
captions, or
program guides
appearing on the
TV screen
The DCT* cannot generate graphics on all video outputs
at all times. If the DCT* is set to 1080i, 720p, or 480p
output format, graphics are only available on the HD
video outputs (DVI and component video). If the DCT* is
set to 480i, graphics are available on all video outputs.
If the DCT* is connected to a standard definition TV,
verify that the DCT* is configured to use the 480i output
mode.
Verify that closed captions on the DCT* have been
enabled in the User Settings menu.
If you are using an IEEE 1394 connection, on-screen
graphics, including closed captions and program guides,
will not be displayed.
There are black
bars to the right
and left of the
picture
Wide screen TVs display 4:3 programs in this format
unless set to Stretch. Turn on the 4:3 OVERRIDE feature
in the User Settings menu. This enables most wide
screen TVs to stretch the video to fill the screen (see
your TV manual for information about stretching 4:3
video).
If the DCT* is connected to a wide screen TV, verify that
the TV TYPE is set to 16:9 in the User Settings menu.
Many HD programs are broadcast in pillar-box format
with black bars to the left and right of the picture. These
programs are broadcast in 16:9 HD formats even though
the video is not 16:9.
There are black
bars above and
below the picture
All 4:3 HDTVs display HD programs in letterbox format
(black bars above and below the picture) because of the
shape of the display screen.
Turn on the 4:3 OVERRIDE feature in the User Settings
menu. This enables most standard screen TVs to display
a full screen picture when the DCT* is tuned to a 4:3
program.
Set the TV TYPE to 4:3 Pan-Scan. This enables the
DCT* to remove the black bars above and below the
picture when possible.
Some SD programs are broadcast in the letterbox format
with black bars above and below the picture. Some wide
screens TVs offer a zoom feature that may be able to
remove the black bars (see your TV manual for
information about zooming 4:3 video).
42


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Motorola DCT 6400 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Motorola DCT 6400 in the language / languages: English as an attachment in your email.

The manual is 1,53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info