504524
122
Zoom out
Zoom in
Previous page
1/141
Next page
Troubleshooting 113
DCP501 User Guide
Problem Possible Solution
There is no
picture on the TV.
Check that the TV is powered on.
Verify that the DCP501 is properly connected to the TV as defined in the
“Installation” section.
Verify that the TV is set to the appropriate input source (Input1, Input2, etc.).
Verify that the DCP501 is set to the appropriate output mode (DVD, CATV,
Video1, etc.).
Replace the video cables.
The picture is not
in color.
Verify that the picture source is not presented in black and white.
Replace the S-Video cable.
VIDEO
The picture
appears
discolored or
improperly tinted.
Check that speakers or other electrical devices that are near the TV are
properly shielded.
d
There is no
picture when in
CATV mode.
Verify that the coaxial cable is properly connected to the DCP501 as defined in
the “Installation” section.
Verify that the DCP501 is properly connected to the TV as defined in the
“Installation” section.
Verify that the DCP501 is authorized for cable TV service as applicable. If not
authorized, call you local cable TV provider or perform a channel scan as
described in the “Operation” section.
The RF signal may not be adequate for the DCP501. Call the cable TV
provider for assistance.
The picture is
“blocky” and
appears to be
“skipping”.
The RF signal may not be adequate for the DCP501. Call the cable TV
provider for assistance.
The cable TV provider may be experiencing technical difficulties. Call the cable
TV provider for assistance.
Some channels
look better than
others.
The DCP501 is capable of receiving both analog and digital channels. Digital
channels provide improved clarity and quality when compared to analog
channels. Call the cable TV provider for more information.
The DCP501 does
not have a TV
program guide
that displays on
the TV.
Verify that the DCP501 is authorized for digital cable TV service.
The DCP501 may not have an IPG loaded onto the device. Call the cable TV
provider for assistance.
CATV
The IPG does not
have any
information.
Under certain conditions, the DCP501 may take several hours to acquire the
applicable program data. Call the cable TV provider for more information.
Unplug the DCP501 from the AC outlet, wait five seconds, and plug the
DCP501 back into the AC outlet. It may take several hours for the DCP501 to
acquire the applicable guide data.
Call the cable TV provider for assistance.
122


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Motorola DCP501 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Motorola DCP501 in the language / languages: English as an attachment in your email.

The manual is 4,1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info