504502
42
Zoom out
Zoom in
Previous page
1/44
Next page
9 TROUBLESHOOTING
32
Problem Possible Solution
audio mode (Dolby Digital, Dolby Pro Logic II
®
, Dolby Pro Logic
®
).
Verify that the receiver is properly configured to work with all
connected speakers.
There is no video on
the TV screen
Verify that the TV is powered on and set to the appropriate input
source for the DCH receiver.
Verify that the DCH receiver is powered on and tuned to an
authorized cable channel.
Verify that all video cables between the DCH receiver and the TV
are firmly connected.
Verify that the coaxial cable feed is firmly connected to the DCH
receiver and the wall jack.
If the DCH receiver video output is connected to a home theater
unit, verify that the home theater unit is powered on and set to the
appropriate input source.
If the DCH receiver video output is connected to a TV through an
HDMI connection, power off the TV and then power off the DCH
receiver. Wait one second and then power on the devices.
Not all HDTVs can display every output format (1080i, 720p, 480p, or 480i) available
on the DCH receiver. To select a different format:
1. Ensure that your DCH receiver is plugged into a power outlet and is turned off.
2. Press the MENU key on the front panel. Your settings are displayed on the
DCH receiver front panel display.
3. Press the and keys to display the HDMI/YPbPr OUTPUT setting.
4. Press the key to cycle through the available output formats until a picture
displays on the TV.
No graphics or
program guides appear
on the TV screen
If you use the IEEE-1394 connection, on-screen graphics, including closed captions
and program guides, are not displayed by the DCH receiver. On-screen graphics and
captions may still be overlaid by your TV, if enabled. Alternatively, use HDMI or
component video instead.
No closed captions
display
Verify on the User Settings menu that closed captions are enabled
on the DCH receiver.
Verify that closed captions are enabled on the TV.
There are black bars to
the right and left of the
picture
Wide screen TVs display 4:3 programs in this format unless set to Stretch. Turn on the
4:3 OVERRIDE feature in the User Settings menu. This enables most wide screen TVs
to stretch the video to fill the screen (see your TV manual for information about
stretching 4:3 video).
If the DCH6416 is connected to a wide screen TV, verify that the TV
TYPE is set to 16:9 in the User Settings menu.
Many HD programs are broadcast in pillar-box format with black bars to the left and
right of the picture. These programs are broadcast in 16:9 HD formats even though
the video is not 16:9.
There are black bars
above and below the
picture
All 4:3 HDTVs display HD programs in letterbox format (black bars above and below
the picture) because of the shape of the display screen.
Turn on the 4:3 OVERRIDE feature in the User Settings menu. This
enables most standard screen TVs to display a full screen picture
when the DCH6416 is tuned to a 4:3 program.
Set the TV TYPE to 4:3 Pan-Scan. This enables the DCH6416 to
remove the black bars above and below the picture when possible.
Some SD programs are broadcast in the letterbox format with black bars above and
42


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Motorola DCH6416 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Motorola DCH6416 in the language / languages: English as an attachment in your email.

The manual is 5,5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info