504520
39
Zoom out
Zoom in
Previous page
1/44
Next page
8 TROUBLESHOOTING
Before calling your service provider, review this troubleshooting guide. This
information is to help you quickly solve a problem. If your problem still exists,
contact your service provider.
Problem Possible Solution
The DCH receiver will
not power on
The DCH receiver may have received a software update and may not power on while
the new software is being installed. Try again in a few minutes.
Verify that the AC power cord is connected to the DCH receiver and
an AC outlet. Unplug the DCH receiver from the AC outlet, plug it
back in, and then press the POWER button.
If the DCH receiver is connected to a switched outlet on another
unit, verify that that unit is powered on. Unplug the power cord from
the DCH receiver’s AC outlet, plug it back it in, and then press the
POWER button. It is recommended to use an unswitched outlet, if
possible.
Press the POWER button on the DCH receiver front panel instead of
the remote control. The batteries in the remote control may be
depleted.
The remote control
does not work
Verify that the remote control is in “Cable” mode.
Verify that there are no obstructions between the remote control
and the DCH receiver. Aim the remote control directly at the DCH
receiver front panel, not the TV or VCR.
The angle between the remote control and the DCH receiver may be too large. Stand
in front of the DCH receiver and not too far to either side.
Press and release operation keys one at a time, firmly and
deliberately.
Try changing channels using the buttons on the DCH receiver front
panel.
Check the batteries in the remote control. Install new batteries if
needed.
There is no audio when
viewing cable channels
Verify that the mute button on the DCH receiver or the remote
control has not been pressed. Press mute on the remote control to
restore sound.
If the DCH receiver audio output is connected to the TV, verify that
the mute button on the TV has not been pressed.
If the DCH receiver audio output is connected to a home theater
receiver, verify that the receiver is set to the appropriate input
source and the mute button on the receiver has not been pressed.
Verify that you have the correct cables for the audio connections.
Verify that the audio cables are firmly connected between the DCH
receiver and the audio playback device (TV, receiver, DVD player,
etc.).
There is no audio from
the center and/or
surround speakers of a
home theater receiver
connected to the DCH
receiver
Not all Dolby Digital
®
programs feature full 5.1 surround sound. In some cases, the
programs may only contain left and right stereo audio.
Verify that the S/PDIF cable (coaxial or optical) is firmly connected to
the DCH receiver and the home theater receiver.
Verify that the home theater receiver is set to a surround sound
29
39


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Motorola DCH3200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Motorola DCH3200 in the language / languages: English as an attachment in your email.

The manual is 5,86 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info