567866

Motorola D802 Manual

12
Zoom out
Zoom in
Previous page
1/116
Next page
12 Base settings
5.
Press
Back
to return to the previous menu level or to return
to standby.
PABX access code
If your D801 is connected to a switchboard, you may need to
enter a
one-digit access code in the dialling sequence to be able to
connect to the outside line.
The access code will be displayed at the beginning of a number
on the screen.
The access code will not be used when you dial the number
yourself (rather than for example from the phonebook). This
allows you to make calls to other switchboard extensions.
1.
Press
Menu
, scroll to
Settings
and press
Select
.
2.
Set Handset
is highlighted. Press
Select
.
3.
Scroll to
PABX Access Code
and press
Select
.
4.
Scroll or to
On
,
Off
or
Set Code
then press
Select
.
If you select
Set Code
, enter the switchboard access code
e.g. 9 then press
Save
.
5.
Press
Back
to return to the previous menu level or to return
to standby.
5. Base settings
Base ringtone
Select from 5 base ringtones.
You will hear a sample ring for each one you highlight.
1.
Press
Menu
, scroll to
Settings
and press
Select
.
2.
Scroll to
Set Base
and press
Select
.
3.
Ringtone
is highlighted. Press
Select
.
4.
Scroll or highlight the ringtone you want.
5.
Press
Select
to confirm.
6.
Press
Back
to return to the previous menu level or to return
to standby.
Base ringer volume
The base has 5 ringer volume settings plus Off.
1.
Press
Menu
, scroll to
Settings
and press
Select
.
2.
Scroll to
Set Base
and press
Select
.
3.
Scroll to
Ringer Volume
and press
Select
.
4.
Press or to display the volume level you want. Press
Select
to confirm.
5.
Press
Back
to return to the previous menu level or to return
to standby.
Dialling mode
Your D801 is pre-set to Tone dialling. You should not normally need
to change this setting. The dial mode options are Tone or Pulse.
1.
Press
Menu
, scroll to
Settings
and press
Select
.
2.
Scroll to
Set Base
and press
Select
.
3.
Scroll to
Dialling Mode
and press
Select
.
4.
Press or to highlight
Pulse
or
Tone
then press
Select
to
confirm.
5.
Press
Back
to return to the previous menu level or to return
to standby.
Ring priority
When you have more than one handset registered to your
base, you can set one handset to ring before the other
handsets. This allows one handset user to answer all incoming
first, like a receptionist.
Choose
All Handsets
if you want all handsets to ring at the same
time or
Select Handset
to nominate a handset to ring two times
before the others.
1.
Press
Menu
, scroll to
Settings
and press
Select
.
2.
Scroll to
Set Base
and press
Select
.
3.
Scroll to
Ring Priority
and press
Select
.
4.
Press or to highlight
All Handsets
or
Select Handset
then
press
Select
.
If you choose
Select Handset
all available handsets are
displayed. Scroll or to highlight the handset you want
then press
Select
.
Scroll or to the number of rings you want to set 2, 4
or 6 and press
Select
.
5.
Press
Back
to return to the previous menu level or to return
to standby.
Recall mode
1.
Press
Menu
, scroll to
Settings
and press
Select
.
2.
Scroll to
Set Base
and press
Select
.
3.
Scroll to
Recall Mode
and press
Select
.
4.
Press or to highlight
Recall 1
or
Recall 2
then press
Select
to
confirm.
5.
Press
Back
to return to the previous menu level or to return
to standby.
First ring
If you have subscribed to your network’s Caller Display service, your
D801801 does not ring until the caller information has been
received and displayed.
However, if you want your handset to ring without waiting for
the caller information to be displayed, set First Ring to On.
Please note that this will mean the first ring you hear will be the
default ringtone. This will change to any ringtone you have set
once the caller information is displayed.
1.
Press
Menu
, scroll to
Settings
and press
Select
.
2.
Scroll to
Set Base
and press
Select
.
3.
Scroll to
First Ring
and press
Select
.
4.
Press or to
On
or
Off
then press
Select
to confirm.
5.
Press
Back
to return to the previous menu level or to return
to standby.
System PIN
The System PIN is used when changing certain settings and
registration / de-registration. The default setting is 0000. You
can change this to your own preferred number up to 8 digits.
When you enter a PIN the digits are shown as ****.
1.
Press
Menu
, scroll to
Settings
and press
Select
.
2.
Scroll to
Set Base
and press
Select
.
3.
Scroll to
System PIN
and press
Select
.
4.
Enter the old PIN (original setting 0000) and press
OK
.
5.
Enter the new PIN and press
OK
.
D811_IFU_EN.fm Page 12 Friday, September 7, 2007 8:01 PM
… 12 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Motorola D802 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Motorola D802 in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 3,51 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info