300904
22
Zoom out
Zoom in
Previous page
1/32
Next page
20
English
"
KEY TONE
"
"
BATTERY LOW
"
"
RANGE ALARM
"
Press .
5.
Press or to select "
ON
" or "
OFF
". Press to confirm.
Flash
Recall is used when connected to certain switchboards, for
transferring calls to another extension number, and for some
network services. Contact your network or switchboard
provider for advice on how to use the (flash) button.
Changing the flash time
You can select the flash time from short or long according to
your switchboard requirements.
Consult your switchboard provider for advice if unsure which
setting you need.
1.
Press to access the main menu.
2.
Press or until "
BS SETTINGS
" is displayed and press
.
3.
Press or to select "
FLASH TIME
" and press .
4.
Press or to select "
SHORT
" or "
LONG
" and press .
Dial mode
You can set your phone to use either Tone or Pulse dialling.
The pre-set setting is TONE dialling, where you will hear a tone
beep each time you dial a number.
Most modern exchanges and switchboards use Tone dialling,
so you should not need to change this setting. Only change it
if your switchboard uses Pulse dialling or if you cannot make a
call using Tone dialling.
1.
Press to access the main menu.
2.
Press or until "
BS SETTINGS
" is displayed and press
.
3.
Press or to select "
DIAL MODE
" and press .
4.
Press or to select "
TONE
" or "
PULSE
" and press .
Registering a new handset
When you register a new handset to your base, you will be
asked to enter the base PIN code.
The pre-set PIN code is 0000. If you wish to change this code,
see page 21.
Each handset can only be registered to one base at a time.
Before registering, make sure the new handset is fully charged
and that you have the base and handset in front of you.
On your base:
1.
Press and hold until you hear the registration tone. You
are now in 'subscription mode'.
On the handset you want to register:
2.
Press to access the main menu.
3.
Press or to select "
REGISTRATION
" and press .
4.
Press or to select your base number.
If the base already has the maximum number of handsets (5)
registered to it, you will hear the reject tone and you will need
to de-register one of the existing handsets before you can
register the new handset.
See the next section below for de-registering handsets.
Allegro_CID TAD.book Page 20 Tuesday, January 15, 2008 4:30 PM
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Motorola d212 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Motorola d212 in the language / languages: English as an attachment in your email.

The manual is 10,16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Motorola d212

Motorola d212 User Manual - German - 40 pages

Motorola d212 User Manual - Dutch - 40 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info