458255
26
Zoom out
Zoom in
Previous page
1/43
Next page
26 Room Monitor
11. Room Monitor
You can use your D1111 handset to monitor the sounds in another room.
If the sounds reach a certain level the handset will automatically dial out
to a preset external number or to another handset. When the Room
Monitor is set to
On
, the handset will display
Room Monitor On
and only the
microphone will be active to monitor the sound levels in the room. Both
the speaker and receiver will be set to
Off
and the handset will not ring if
there’s any incoming call.
To switch Room Monitor On
1.
Press
Menu
, scroll d to
Extra
then press
Select
.
Room Monitor
is
highlighted. Press
Select
.
Mode
will be highlighted.
2.
Press
Select
, scroll d to
On
then press
Select
.
Set to ON
is displayed for 2
seconds. The handset returns to idle screen and disply as
Room
Monitor On
.
To switch off
Room Monitor
press
Off
.
To change the monitor level
The monitor level can be set to High or Low, the default setting is
Low
.
To increase the sensitivity of the Room Monitor:
1.
Press
Menu
, scroll d to
Level
, press
Select
and scroll u or d to select
Low
or
High
setting.
To set the dial out number
1.
Press
Menu
, scroll d to
Call to
and press
Select
.
2.
Use the u or d key to select
External
or
Internal
.
External
1.
Press
Select
and
Enter Number:
prompt will be displayed.
2.
Enter the number and press
Save
.
Saved
will be displayed.
When
Room Monitor
is switched on and the sound level reaches a
certain level the number will be automatically dialled.
Internal
1.
Press
Select
and the registered handset will be listed, for example
Handset 2
.
2.
Scroll u or d to select the handset the
Room Monitor
will call if the noise
levels reach a certain level.
3.
Press
Select
and
Set to handset 2
is displayed.
NOTE
If only one handset is registered the display prompts
Not available
and
returns to the previous screen. You must register additional handsets
before the handsets will be displayed and make Internal calls.
NOTE
If the Room Monitor is triggered to call a handset or number and the
called handset is on a call, an alert tone of 3 beeps will be heard. If the
Room Monitor is triggered continuously the alert beap will be emiitted
every 5 seconds.
WARNING
This product is not intended for use as a baby safety device and is not a
substitute for adult supervision.
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Motorola D1114 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Motorola D1114 in the language / languages: English as an attachment in your email.

The manual is 2,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Motorola D1114

Motorola D1114 User Manual - German - 31 pages

Motorola D1114 User Manual - Dutch - 47 pages

Motorola D1114 User Manual - French - 31 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info