458253
37
Zoom out
Zoom in
Previous page
1/43
Next page
Help 37
15. Help
Phone does not work
Have you installed the batteries correctly?
Check that the mains power is correctly connected.
No dial tone
Is the telephone cord of the base plugged into the phone socket?
Check that the mains power is correctly connected to the base and to
the handset charger(s).
Only use the telephone cord supplied with the phone.
Cannot dial out or receive calls
Check that the mains power is correctly connected.
The batteries may need recharging.
Has there been a power cut? If so, place the handset back on the base
for 10 seconds and try again. If it still does not work disconnect the
batteries and mains power for 10 minutes, then reconnect and try again.
You have a dial tone, but the phone will not dial out
You may need to change the dial mode from tone to pulse, see
page 19.
If you are connected to a switchboard, check whether you need to dial
an access code.
Handset does not ring
The ringer volume may be switched off, see page 17.
Check that the mains power is correctly connected.
Check that the line cord is connected.
Make sure the handset is registered to the base, see page 36.
No display
The batteries may be flat, dead or incorrectly inserted. Recharge or
replace the batteries.
icon flashes
Is the handset registered correctly to the base, see page 36.
Check that the mains power is correctly connected.
Check that the handset is within range of the base.
The batteries are low, place the handset on the base/charger to
recharge.
icon not scrolling
Try cleaning the charging contacts.
Check that the mains power is correctly connected.
You hear the busy tone when you press
<.
Make sure the handset is in range of the base.
Another handset registered to your D1111 base may be on the line.
Answer machine does not record any messages
The memory may be full. Play and delete old messages, see page 29.
Answer machine messages have the wrong date and time
Have you set the date and time? See page 21.
No Caller Display number/name displayed
Have you subscribed to a Caller Display service from your network
provider? See page 24.
The caller may have withheld their number.
An exact name/number match was not found in your directory. Check
that you have stored the full STD dialling code.
Cannot register a handset to a base
You can register a total of 5 handsets to your D1111 base and you can
register your D1111 handset to up to 4 bases. Check that you have not
exceeded the limits.
Check that you have entered the correct PIN number (default PIN
0000).
Check that you are at least one metre away from other electrical
equipment to avoid interference when registering.
Base unit does not ring
Have you connected the telephone line correctly?
Is the base ringer set to off?
You may have a faulty line or socket. Try using another socket or line.
Buzzing noise on my phone or on other electrical equipment nearby
Sometimes your D1111 can interfere with other electrical equipment if
it is placed too close. It is recommended that you place your D1111 at
least one metre away from electrical appliances or metal obstructions
to avoid any risk of interference.
37


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Motorola D1112 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Motorola D1112 in the language / languages: English as an attachment in your email.

The manual is 2,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Motorola D1112

Motorola D1112 User Manual - German - 31 pages

Motorola D1112 User Manual - Dutch - 47 pages

Motorola D1112 User Manual - French - 31 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info