458236
10
Zoom out
Zoom in
Previous page
1/26
Next page
10 Using the phone
3. Using the phone
Calls
Make a call
1.
Press <.
2.
Dial the telephone number.
Pre-dial
1.
Enter the phone number (maximum 24 digits). If you make a mistake press e.
2.
Press < to dial the phone number entered.
Dial one touch numbers 1 to 9
1.
Press and hold a key from 1 to 9 until the number is displayed and dialled.
- If no number is stored, you hear a beep.
Call from the phonebook
1.
Press d. The first entry in the phonebook is displayed.
2.
Scroll u or d to the entry you want.
3.
Press < to dial the number.
TIP
Instead of scrolling to browse the phonebook entries, press the numeric key corresponding to the
first letter of the entry you wish to locate. For example, pressing 2 will show the entries starting
with A. Pressing 2 again will show the entries starting with B, etc...
Call from the calls list
NOTE
You need to subscribe to your network’s Caller Line Identification service to be able to see the
caller’s number in the calls list. See “Calls list” on page 13 for more details.
1.
Press u to enter
CALL LIST
. The first entry in the call list is displayed.
2.
Scroll u or d to the entry you want.
3.
Press < to dial the number.
Answer a call
1.
When the phone rings and flashes in the display, press < or press v to answer the
call via the loudspeaker.
WARNING
When the phone is ringing, avoid holding the earpiece too close to your ear as it may damage your
hearing. Handsfree activation can suddenly increase the volume in the earpiece to a very high
level. Make sure the handset is not too close to your ear.
NOTE
If you have subscribed to your Network’s Caller Identity service and assigned a VIP Group to the
caller’s number, the caller’s details are displayed before the phone starts ringing (see “Store an
entry” on page 11 and “Group melody” on page 15). You can set your phone to give the default
ringtone as soon as the call is received then once the caller’s identity is displayed, the assigned
ringtone will start. See “First ring” on page 16.
TIP
If Auto Pick up mode (see page 16) is on, simply lift up the handset from its base to answer the
call. The default setting is On.
NOTE
An incoming call has priority over other events. Whenever there is an incoming call, other
operations in progress such as phone settings, menu navigation, etc. will be ended.
Adjust volume
1.
During a call, press u or d to adjust the earpiece or loudspeaker volume.
- The level is shown in the handset display.
Mute
Mute the microphone so that you can talk to someone else in the room without your caller hearing
you.
1.
During a call, press e.
- The microphone is muted.
2.
Press e again to turn the microphone back on.
End a call
1.
Press >.
After you hang up, the duration the phone is off-hook is displayed for 5 seconds.
NOTE
If auto hang-up is on (see page 16) simply replace the handset on the base to end the call. The
default setting is ON.
Switch handset on/off
1.
Press and hold > until the handset switches off.
2.
Press and hold > again to switch the handset back on.
Call a second external number
Put an external caller on hold to make a second external call. You can then switch between both
callers or hold a 3-way conference call.
1.
During your call, press m. Scroll d to
INIT 2ND CALL
.
2.
Press m.
- Display shows
CALLING R
3.
Enter the second number.
4.
When your second caller answers, press m to open the option menu:
CONFERENCE
– press m to initiate a 3-way with an external caller and internal caller.
SWITCH CALLS
– press m to switch between the two callers.
5.
Press > to hang up.
Intercom
This feature is only available when there are at least 2 registered handsets. It allows you to make
internal calls, transfer external calls from one handset to another and use the conference option.
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Motorola D1012 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Motorola D1012 in the language / languages: English as an attachment in your email.

The manual is 1,23 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Motorola D1012

Motorola D1012 User Manual - German - 66 pages

Motorola D1012 User Manual - Dutch - 30 pages

Motorola D1012 User Manual - French - 30 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info