466735

Motorola D 810 series Manual

8
Zoom out
Zoom in
Previous page
1/133
Next page
8 Using the phone
Character map
Key Case Assigned characters and symbols
L/U*
L
U
L
U
L
U
L
U
L
U
L
U
L
U
L
U
L/U
L/U bring up symbol table
L/U short press to switch between Abc, abc, ABC
and 123 mode
long press to switch between input
languages
*L = Lower
U = Upper
3. Using the phone
CALL TIMER
Your handset will automatically time the duration of all external
calls. The handset display shows the call duration both during
and for a few seconds after your call.
Switch the handset on / off
1.
In standby, press and hold to switch the handset off.
When off, press to switch back on.
Make a call
1.
Press .
2.
When you hear the dial tone, dial the number.
If the number dialled matches an entry in the phonebook, the
name is displayed.
Preparatory dialling
1.
Dial the number first. If you make a mistake press
Clear
to
delete the last digit.
2.
Press to dial.
If the number dialled matches an entry in the phonebook, the
name is displayed.
End a call
1.
Press .
Receive a call
When you receive an external call, the phone rings. The display
shows
External Call
and the caller’s number or, if the number
matches an entry stored in the phonebook, the name is
displayed.
1.
Press to answer the call.
Adjust the earpiece/receiver volume
1.
During a call, press or to increase or decrease the
volume. The display shows the level.
Secrecy
During a call, you can talk to someone nearby without your
caller hearing.
1.
During a call, press
Secrecy
. The display shows
Secrecy On
and your caller cannot hear you.
2.
Press
Off
to return to your caller.
Internal calls
Call another handset
If you have more than one handset registered to the base, you
can make internal calls between two handsets.
1.
Press then the number (1-5) of the handset you want to
call.
2.
Press
OK
to dial.
When an internal call is received, the display shows
Internal Call
Handset X
(where X is the calling handset) and the handset
number.
Transfer a call
You can transfer an external call to another handset registered
to the base.
During your call:
1.
Press then the handset number (1-5) you want.
2.
Press
OK
to dial or press
End
to cancel the calls request and
return to the caller.
3.
When the other handset answers you can announce the
caller.
4.
Press to complete the transfer or to switch back and
forth between both callers.
If the other handset does not answer, press
End
to return to your
original caller.
3-way conference call
You can hold a 3-way conference call between 2 internal callers
and 1 external caller.
During a call to an external caller:
1.
Press then the handset number (1-5) you want.
2.
Press
OK
to dial.
3.
When the other handset answers you can announce the
caller.
4.
Press
Join
to begin the conference call. Display shows
Conference Call
.
5.
Press to hang up.
Handsfree
Handsfree lets you talk to your caller without holding the
handset. It also enables other people in the room to listen to
your conversation over the loudspeaker.
D811_IFU_EN.fm Page 8 Friday, September 7, 2007 7:37 PM
… 8 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Motorola D 810 series at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Motorola D 810 series in the language / languages: English, German, French, Italian, Spanish, Spanish as an attachment in your email.

The manual is 3,97 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info