567862
18
Zoom out
Zoom in
Previous page
1/104
Next page
18 Advanced settings
NOTE
Make a note of your PIN. If you forget your PIN you will need to reset your product.
Reset
This will reset your D701 to its default settings.
1.
Press m, scroll d to
ADVANCED SET
and press m.
2.
Scroll d to
RESET UNIT
. Press m.
3.
CONFIRM?
is displayed. Press m.
NOTE
Entries stored in the phonebook are retained. After reset, depending on your country, the welcome
mode setting may be shown on the handset display.
Default settings
Auto prefix
You can set the D701 to detect a dialling number and replace it with another number. The number
to be detected can be up to 5 digits long. It can be replaced with a number up to 10 digits.
1.
Press m, scroll d to
ADVANCED SET
and press m.
2.
Scroll d to
PREFIX
. Press m.
3.
DETECT DIGIT
is displayed. Press m.
4.
Enter the number you want to be detected and press m.
5.
Scroll to
PREFIX NUM
. and press m.
6.
Enter the number you want it replaced with and press m.
7.
Press > to return to standby.
Country
If you move to another country you can set your phone to be compatible with the network settings
of that country.
NOTE
If you make a mistake during welcome mode country selection, you can also reset your country.
Depending on your country, this option may be displayed as
NOT AVAIL
or you country may not be
displayed.
1.
Press m, scroll d to
ADVANCED SET
and press m.
2.
Scroll d to
SEL. COUNTRY
. Press m.
3.
Enter the 4-digit master PIN and press m.
4.
Scroll u or d to display the required country.
5.
Press m to confirm.
Intrusion
When an external call is taking place, another handset registered to the base can join in, making
the call a 3-way conference, just by pressing <.
To enable this, Intrusion must be switched On.
1.
Press m, scroll d to
ADVANCED SET
and press m.
2.
Scroll d to
INTRUSION
. Press m.
3.
Scroll u or d to
ON
or
OFF
.
4.
Press m to confirm.
5.
Press > to return to standby.
ECO mode
To reduce the level of power emissions, you can select low power or ECO mode. When the ECO
mode is set to
ON
, the base transmission power will be reduced.
To turn ECO Mode to
ON
or
OFF
:
1.
Press m, scroll d to
ADVANCED SET
and press m.
2.
Scroll d to
ECO MODE
and press m.
3.
Press u or d to highlight
ON
or
OFF
then press m to confirm.
- A confirmation beep is emitted and the handset display will switch between the handset’s
name and
ECO MODE
.
NOTE
When Eco Mode is set to
ON
, the handset range will be reduced.
Handset name Handset
Key tone On
First ring On
Auto pick up On
Auto hang up On
Ringer melody Ring 1
Ringer volume High
Earpiece volume 3
Phonebook Unchanged
Call log Empty
Redial list Empty
Master PIN 0000
Keypad lock Off
Clock 00:00
Alarm Off
Dial mode Tone
D701_IFU_EN_for_EU.book Page 18 Friday, August 24, 2007 5:19 PM
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Motorola D 702 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Motorola D 702 in the language / languages: German as an attachment in your email.

The manual is 14,15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info