457366
27
Zoom out
Zoom in
Previous page
1/32
Next page
25
English
2.
Press or to take the external call.
Transferring a call
You can transfer an external caller from your handset to
another internal handset.
During an external call:
1.
Press . The external caller is put on-hold.
2.
Enter the number of the handset you want to transfer a call
with using the number keypad.
3.
When the called handset answers, press or place the
handset back on the base to transfer the call.
If the called handset does not answer, press to return to
the external caller.
Conference call
You can hold a 3-way conversation (conference call) between
your handset, an external caller and another internal handset
user.
During an external call:
1.
Press . The external caller is put on-hold.
2.
Enter the number of the handset you want to have a
conference call with using the number keypad. The called
handset will ring.
3.
When the called handset answers, press on the
initiating handset to start your conference call.
4.
Any handset can press at any time to leave the
conference call.
15. Simple solutions
The most common problems often have the simplest
solutions. We hope that you will not experience any problems
with your product, but in the event that you do, this section
hopes to overcome any problems quickly and with minimum
effort.
Firstly, check that:
the telephone line cord is correctly connected.
the mains power cord is correctly connected and switched
on.
the batteries are charged and not in need of replacing.
If you have more than one handset registered to your base
remember to check the connections on these too.
If you are still experiencing a problem, you are likely to find a
solution below.
Handset/Base
No dial tone
Is the handset registered to the base? - see page 20.
Is the symbol flashing and can you hear a beep during a
call? - if so, move closer to the base as you are out of
range.
Cannot dial out
Is symbol displayed? - if so, the keypad lock is on, see
page 11.
Handset does not ring
The ringer volume may be set to off. - see page 18.
Is the symbol flashing? - if so, move closer to the base
as you are out of range.
Handset is not charging properly
Check that the charge light is on and that the handset is
sitting correctly in the base. Clean the charging contacts
with a dry cloth.
Allegro_CID TAD.book Page 25 Tuesday, January 15, 2008 4:30 PM
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Motorola D 210 series at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Motorola D 210 series in the language / languages: English as an attachment in your email.

The manual is 10,16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Motorola D 210 series

Motorola D 210 series User Manual - German - 40 pages

Motorola D 210 series User Manual - Dutch - 40 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info