457365
22
Zoom out
Zoom in
Previous page
1/28
Next page
20
English
If you have more than one handset registered to your base
remember to check the connections of these too.
If you are still experiencing a problem, you are likely to find a
solution below.
Handset/Base
No dial tone
Is the handset registered to the base? – see page 15.
Is the symbol flashing and can you hear a beep during a
call? – if so, move closer to the base as you are out of
range.
Cannot dial out
Is symbol displayed? - if so, the keypad lock is on, see
page 10.
Handset does not ring
The ringer volume may be set to off, see page 12.
Is the symbol flashing? - if so, move closer to the base
as you are out of range.
Handset is not charging properly
Check that the charge light is on and that the handset is
sitting correctly in the base. Clean the charging contacts
with a dry cloth.
Are you using the power adaptor supplied with your
phone?
Handset will not link up with the base
Is the symbol flashing? - if so, move closer to the base
as you are out of range.
Is the handset registered to the base? - see page 15.
Buzzing noise on my radio, TV, computer or hearing aid?
Sometimes your phone may interfere with other electrical
equipment if it is placed too close. We recommend you
leave a distance of at least one metre to avoid this.
Cannot make a call
Is Call Barring set? - see page 14.
Caller ID
Caller's details are not displayed
Have you subscribed to a caller ID service? If not, contact
your network provider.
The caller may have withheld their details.
Let the phone ring a couple of times as there may be a
delay in receiving the caller ID information.
Caller's name is not displayed even though it is stored in the
phonebook
Have you stored the telephone number with the full STD
(dialling) code in the phonebook? The name will only be
displayed if an exact number match is found.
14. General information
IMPORTANT
This equipment is not designed for making emergency
telephone calls when the power fails. Alternative
arrangements should be made for access to emergency
services.
This product is intended for connection to analogue public
switched telephone networks and private switchboards in the
European Union.
Safety
Only use the power supply suitable for this model. Using
an unauthorised power supply will invalidate your
guarantee and may damage the telephone.
Allegro_CID.book Page 20 Tuesday, January 15, 2008 3:07 PM
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Motorola D 200 series at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Motorola D 200 series in the language / languages: English as an attachment in your email.

The manual is 8,11 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Motorola D 200 series

Motorola D 200 series User Manual - German - 32 pages

Motorola D 200 series User Manual - Dutch - 32 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info