534349
42
Zoom out
Zoom in
Previous page
1/60
Next page
42
Using additional handsets
10. Using additional handsets
Upto5handsetscanberegisteredtoonebasestation.Additionalhandsets
mustberegisteredtothebasebeforeyoucanusethem.
• TheinstructionsdescribedbelowapplyspecicallytotheC2010handset.
Ifyouwishtoregisteranothermanufacturershandset,theinstructions
mayvary.Inthiscase,pleaserefertotheinstructionmanualofthe
additionalhandset.
• TheSystemPINisrequiredtoregisterorunregisterhandsets.Thedefault
PINis0000.
10.1 Registering an additional handset
NOTE
Handset batteries must be fully charged before you start to register. Hold
your handset close to the base during the registration process. Handsets that
were supplied with your C2010 base are already preregistered.
Onthebase:
1. Pressandhold
untilthebaseemitsadoublebeep.Thebasewill
remaininregistrationmodefor90seconds.
Onthehandset:
1. Press
Menu
,scroll to
Registration
andpress
Select
.
2.
Register Handset
ishighlighted.Press
Select
.
3. Basesaredisplayed.Ifnecessary,scroll
or toanewbaseyouwish
toregistertheC2010handsettoandpress
Select
.
4. EnterthesystemPINandpress
OK
.
5. Thedisplayshows
Searching Base X
.
6. Whenregistrationissuccessfulthedisplayshows
Handset Registered
andyou
hearaconrmationbeep.
NOTE
If registration is not successful the rst time, please repeat the process again
in case the base registration period ran out of time. If the base is not found
after a few seconds, the handset returns to standby. Try registering again.
If there are already 5 handsets registered to the base, registration will fail.
You must de-register a handset before you can register a new one.
10.2 Register a different make of handset to your C2010 base
IMPORTANT
DECT GAP Prole only guarantees that basic calling functions will work
correctly between different makes / types of handset and base. There is a
possibility that certain devices such as Caller ID will not work correctly.
42


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Motorola C2012 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Motorola C2012 in the language / languages: English as an attachment in your email.

The manual is 1,21 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Motorola C2012

Motorola C2012 User Manual - German - 60 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info