552864

Moto Guzzi 1100 ES Quota Manual

178
Zoom out
Zoom in
Previous page
1/189
Next page
11
1
2
3
4
5
6
7
8
9
10
DISASSEMBLY/REASSEMBLY SEQUENCES AUSBAU-/MONTAGESEQUENZEN
4B EXHAUST PIPES
DISASSEMBLY:
• Remove the silencer, see chap. 4A Section 10;
• Loosen clamps “D”;
• Unscrew the 2 nuts “E” and collect the washers “F”;
• Remove the locking ring “G”;
• Remove the spacers “H” and the gasket between the
manifold and exhaust pipe “I”;
• Remove the exhaust pipes “2-3” and collect the gas-
ket “L”;
WARNING
Plug the exhaust ports on the cylinder head to
avoid foreign bodies entering the combustion
chamber.
REASSEMBLY:
• Fit the gasket “L” and the clamps “D” to the exhaust
manifolds “1” and “2”;
• Fit the exhaust pipe into the respective insertion seat
on the expansion chamber;
• Fit the gasket and spacers between the exhaust mani-
fold and cylinder head;
• Position the locking ring “G” and tighten the two nuts
with washer to the prescribed torque;
• Tighten the clamps “D” for connection to the expan-
sion chamber;
• Refit the silencers.
4C EXPANSION CHAMBER
DISASSEMBLY:
• Remove the silencer from the motorcycle as described
in chap. 4A in this section;
• Loosen the 2 clamps “D” on the exhaust pipes;
• Unscrew the nut “M” and remove the expansion cham-
ber “4” by pulling it out of the exhaust pipes.
REASSEMBLY:
Carry out the disassembly procedures in reverse order.
4B AUSPUFFROHRE
ABNAHME:
• Den Schalldämpfer abnehmen, siehe Kap. 4A Abschn.
10.
• Die Schellen “D” lockern.
• Die 2 Muttern “E” lösen und die Zwischenlegscheiben
“F” abnehmen.
• Den Flansch “G” entfernen.
• Die Distanzstücke “H” und die Dichtung zwischen Aus-
puffkrümmer und Auspuffrohr “I” entfernen.
• Die Auspuffrohre “2-3” entfernen und die Dichtung “L”
abnehmen.
ACHTUNG
Die Auslasskanäle am Zylinderkopf verstopfen,
so dass verhindert werden kann, dass Fremd-
körper in die Verbrennungskammer eindringen
können.
MONTAGE:
• Die Dichtung “L” und die Schellen “D” an den Auspuff-
krümmern “1” und “2” einfügen.
• Das Auspuffrohr in die entsprechende Aufnahme an
der Ausdehungskammer einfügen.
• Die Dichtung und die Distanzstücke zwischen Auspuff-
krümmer und Zylinderkopf einfügen.
• Die Nutmutter “G” in ihre Position bringen, dann die 2
Muttern mit Unterlegscheibe auf das vorgeschriebene
Anzugsmoment bringen.
• Die Verbindungsschellen “D” an der Ausdehnungskam-
mer festziehen.
• Die Schalldämpfer erneut montieren.
4C AUSDEHNUNGSKAMMµER
ABNAHME:
• Den Schalldämpfer in der im Kap. 4A dieses Abschnitts
beschriebenen Weise abnehmen.
• Die beiden 2 Schellen “D” für den Halt an den Aus-
puffrohren lockern.
• Die Mutter “M” lösen, dann die Ausdehnungskammer
“4” von den Auspuffrohren abziehen.
MONTAGE:
Die Ausbauarbeiten in umgekehrter Reihenfolge vorneh-
men.
… 178 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Moto Guzzi 1100 ES Quota at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Moto Guzzi 1100 ES Quota in the language / languages: English, German, Italian as an attachment in your email.

The manual is 7,19 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info