552864

Moto Guzzi 1100 ES Quota Manual

142
Zoom out
Zoom in
Previous page
1/189
Next page
9
1
2
3
4
5
6
7
8
9
10
FRONT FORK: OIL CHANGE - OVERHAUL VORDERRADGABEL: ÖLWECHSEL - REVISION
2 TROUBLES - CAUSES - SOLUTIONS
The following paragraph lists some of the fork troubles,
their causes and suggests the possible solution.
Always refer to this table before operating on the
fork.
2STÖRUNGEN - URSACHEN - ABHILFEN
In diesem Paragrafen werden sowohl einige Störungen
angegeben, die während des Gabeleinsatzes auftreten
können, als auch die Ursachen aufgezeigt, durch wel-
che sie hervorgerufen wurden, und eine eventuelle Ab-
hilfe angeführt.
Bevor Eingriffe an der Gabel vorgenommen werden,
immer diese Tabelle konsultieren.
STÖRUNGEN URSACHEN ABHILFEN
Ölverlust des Dichtrings 1. Abgenutzter Dichtring 1. Den Dichtring auswechseln
2. Steifes Tauchrohr 2. Das Rohr und den Ring
auswechseln
3. Schmutziger Ring 3. Reiningen oder auswechseln
Ölverlust am Boden 1. Bodendichtung defekt 1. Die Dichtung auswechseln
2. Bodenschraube locker 2. Die Schraube anziehen
Die Gabel erweist sich bei allen 1. Niedriger Ölpegel 1. Den Ölpegel wieder herstellen
Einstellungen zu weich 2. Feder außer Betrieb 2. Die Feder auswechseln
3. Zu niedrige Ölviskosität3. Ölviskosität ändern
Die Gabel erweist sich bei allen 1. Zu hoher Ölpegel 1. Den Ölpegel wieder herstellen
Einstellungen zu fest 2. Zu hoher Ölviskosität2. Ölviskosität ändern
Die Gabel reagiert nicht auf die 1. Nadel des Verschlusses blockiert 1. Den Verschluss abbauen
Einstellveränderungen und reinigen
auswechseln 2. Öl verunreinigt 2. Das Ol reinigen und
3. Federbeinventile durch 3. Abbauen und reinigen
Verunreinigungen verstopft
TROUBLES CAUSES SOLUTIONS
Oil leakage form the seal ring 1. Seal ring is worn 1. Replace the seal ringt
2. The stranchion is rigid 2. Replace stanchion and ring
3. The ring is dirty 3. Clean or replace it
Oil leakage form the bottom 1. The foot gasket is faulty 1. Replace the gasket
2. The foot screw is loose 2. Tighten the screw
The fork is too soft in each oil 1. Oil lever is low 1. Top up the oil level
adjustment condition 2. Spring is faulty 2. Replace the spring
3. Oil viscosity is too low 3. Change oil viscosity
The fork is too hard in each oil 1. Oil level too high 1. Restore oil level
adjustment condition 2. Oil viscosity is too high 2. Change oil viscosity
The fork does not react to the 1. Plug pin is blocked 1. Remove plug and clean it
different adjustment 2. Oil is dirty 2. Clean and replace oil
3. Shock absorber valves are clogged 3. Remove and clean
… 142 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Moto Guzzi 1100 ES Quota at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Moto Guzzi 1100 ES Quota in the language / languages: English, German, Italian as an attachment in your email.

The manual is 7,19 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info