493823
70
Zoom out
Zoom in
Previous page
1/100
Next page
60 Motion Computing LE-Series and LS-Series Tablet PCs User Guide
Even with the Narrow Angle setting, if a sound is loud enough and within the
angle of acceptance (no matter how distant), the sound will be picked up by the
microphones. The advantage of the Tablet PC is that it detects fewer
extraneous sounds than other audio systems. You can further limit the
detection of these outside sounds by turning down the microphone volume and
speaking louder; this reduces the microphones’ range and restricts the
capability to detect extraneous sounds.
The Tablet PC contains pre-installed audio components. If you install a third-
party audio device (such as USB or Bluetooth devices), the Motion-installed
audio may not work. If this happens, you must reinstall the Motion-audio
components. (The Motion audio components are the SigmaTel and Knowles
Acoustics audio drivers.) After you install these, if you still have problems
recording, contact Motion Technical Support or the Bluetooth or USB
manufacturer’s technical support.
To improve speech recognition, run additional speech training sessions. Open
the Windows Control Panel and select Speech to perform additional speech
training. As you do this, speech recognition accuracy will gradually improve.
PORTS AND
SLOTS
PC Cards (LE-Series)
The PC Card Slot, also referred to as a PCMCIA Card Slot, holds one Type-II PC
Card for networking, memory expansion, or accessory connection.
1. To install a PC Card, insert it label side up.
2. To remove a PC Card, push the button next to the slot until it pops out.
3. Push it again to eject the PC Card.
NOTE: Your Tablet PC ships with a plastic blank card in the PC Card
slot. When the slot is not in use, we recommend that you leave the
plastic blank in place.
Secure Digital (SD) Cards
The SD Card Slot holds one SD Card for networking, memory expansion, or
accessory connection.
1. To install an SD Card, insert it in the slot, label side up.
2. To remove the SD Card, grip the edge of the card and carefully pull it from
the slot. Notice that the edge of the Tablet PC is curved slightly in the area
of the SD Card. This makes it easier to grip the edge of the card for inser-
tion and removal.
Infrared (IrDA) Port
The IrDA port uses the infrared connection protocol to transfer data or digital
images from any IrDA enabled device to a specified file location on another IrDA
equipped device. Typically, the devices must be within three feet of each other.
Refer to the “Using Infrared Wireless Connections” on page 70 for more
information.
USB Ports
There are two high speed USB ports on the Tablet PC that can be used to attach
any USB device to the Tablet PC. Typically a USB device draws power from the
Tablet PC, therefore it is advisable to use AC power whenever USB devices are
attached. Running USB devices while operating on battery power will adversely
affect your rate of power consumption.
70


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Motion Computing LS-SERIES at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Motion Computing LS-SERIES in the language / languages: English as an attachment in your email.

The manual is 3,24 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info