493802

Motion Computing CL900 - FWS-001 Manual

66
Zoom out
Zoom in
Previous page
1/81
Next page
60 Chapter 4 Troubleshooting and FAQs Troubleshooting
The display goes black while the tablet PC is still turned on
• The tablet might have turned off the display to save power. To restore the display, touch
the screen with your finger or the pen.
• The tablet might have gone into Sleep mode. Press and hold the power button for
about one second.
• The tablet might have gone into low-battery Hibernation mode. In Hibernation mode,
the power status light is off. Plug the tablet in to AC power, then press and hold the
power button for about one second.
Battery problems
The battery does not last very long (less than eight hours)
• Hot or cold conditions can adversely affect the battery charge. Use AC power if you are
operating the tablet in these conditions.
• Accessory devices such as a DVD player and applications that make heavy use of the
hard drive can drain the battery more quickly. Remove the accessory devices or use AC
power if possible.
• Condition the battery once a month by using the tablet on battery power and allowing
the battery charge to drop below 20 percent before connecting the battery to AC power.
• For other battery optimizing tips, see “Battery and power management tips” on page 48.
• Have the battery replaced. While the built-in lithium-ion battery is designed for a long
battery life, you may find the need to replace it. If so, contact your Motion Computing
service provider. Only authorized service providers can replace the battery.
Display problems
When I connect to an external monitor, the cursor appears on the external monitor
and not on my tablet
• This is a known Windows 7 issue. If you have connected multiple touch-enabled displays,
Windows may not assign touch to the correct display. To fix this issue, run Setup to
assign touch to the appropriate display. Make sure a keyboard is attached to your tablet
and then open
Motion Dashboard. Tap Pen & Tablet, then tap Tablet PC Settings. Tap
the Display tab, then tap Setup next to “Configure your pen and touch displays.” Tap
Touch Input, then press the Enter key until you see the instructions appear on the
display that you want to use for touch input. Follow the on-screen instructions for
setting up touch on this display.
When I disconnect an external monitor, the desktop area is larger than the tablet PC
display
• The tablet may have expanded the desktop beyond the display area of the tablet PC
display when it was connected to the external monitor. Use Motion Dashboard to reset
the tablet
PC to the display setting for stand-alone tablets. Open Motion Dashboard, tap
Display. Then, from the Display Scheme drop-down list, select Tablet Only.
The display is too dim
• The display brightness may be set too low. Use Motion Dashboard to brighten the
display. Open
Motion Dashboard, tap Display, then move the brightness slider to the
desired level.
… 66 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Motion Computing CL900 - FWS-001 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Motion Computing CL900 - FWS-001 in the language / languages: English as an attachment in your email.

The manual is 2,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info