Chapter 2 Using your C5t/F5t Using the smart card reader 54
After you restart the computer, you should configure the authentication rules for strong
logon security.
To configure authentication rules:
1. Start Motion OmniPass (page 50).
2. Tap Change Your OmniPass Settings.
3. Tap Set user authentication rules and policies.
4. Select the appropriate authentication rules.
5. Tap OK.
Using the smart card reader
Your tablet may include the optional smart card reader located on the back of the tablet
next to the battery. Using smart card software, this device reads information from the smart
card when the card is inserted into the reader.
The smart card is an ISO 7816 PC/SC compliant, contact type smart card reader/writer.
Depending on the smart card software you’re using:
• You may receive an acknowledgement when the smart card is fully engaged in the
reader.
• You may receive a prompt or be required to shut down the software before removing the
smart card.
• Some smart cards may require you to insert the smart card for authentication, and then
remove the smart card when authentication is completed.
• Some smart cards may require keeping the card in the reader while the smart card
software is running.
To insert the smart card:
1. Place the smart card in front of the smart card reader opening with the metal contacts of
the embedded chip facing the back of the tablet.
2. Slide the smart card into the smart card reader until the card is firmly seated in the
reader.
To remove the smart card:
1. Depending on your smart card software, you may be required to shut down the smart
card software first before removing the card. With this type of software, removing the
smart card while the tablet is running can result in logging off or shutting down the
tablet.
2. Pull the card straight out of the reader.