Manual Morso S140 (page 31 of 48) (English)

744457

Zoom out

Zoom in

1/48

Sprog

2. Requirements regarding the room, chimney and fresh air connection for the insert

The insert must not be placed in

• rooms where the necessary combustion air is insucient/not available,

• publicly accessible areas (such as escape routes),

• rooms that are publicly accessible. Stairs in residential properties, where there are no

more than 2 apartments, are not considered publicly accessible rooms,

• rooms where ammable or explosive materials or compounds are handled, stored or

produced,

• rooms or residences where the air is extracted by means of vents, such as air or hot air

units, ventilation units, tumble driers, unless the function of the insert is ensured.

The following must be ensured if a ventilation unit has been installed

• the systems in question use only circulating air from the room,

• the systems in question have safety devices that automatically and reliably prevent a

vacuum in the unit,

• simultaneous operation of the replace and extraction system is prevented by the sa-

fety equipment,

• the ue guide is monitored by special safety devices,

• the ow of combustion air to the inset and the ow rate in the ventilation unit in the

room do not exceed an underpressure if more than 0.04 mbar. This must be maintained

when adjusting or removing easily accessible operating equipment on the ventilation sy-

stem.

Morsø inserts draw their combustion air solely through an air nozzle located on the un-

derside of the insert. When installing, therefore, a safe and functioning supply of air must

be ensured to the whole of the replace structure. You, therefore, need to observe the

correct dimensions for the pipes/air grates supplying the combustion air. Placing the air

grates in the replace correctly is very important. If this is not done, the replace may not

get sucient air. To ensure an adequate supply of combustion air, we recommend using

a closed air pipe/supply between the air nozzle under the stove from the pipes or grates

that supply the air from the room to the replace.

Important!

The air nozzle for the combustion air must always be connected,

otherwise air cannot be supplied to the combustion chamber

2.1 Supplying combustion air from outside/externally

The combustion air can also be supplied from outside through a pipe led directly in the

replace.

We recommend contacting the chimney sweep to measure the pipework correctly.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Morso S140 in the language / languages: English as an attachment in your email.

The manual is 8,24 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Morso S140 Manual

Product: