744454
40
Zoom out
Zoom in
Previous page
1/48
Next page
40
Sprog
5.7. Expansion seams
- There must be NO contact/connection between the inset and the lining (11)! There-
fore, all places of contact between the inset and lining must be shielded with a sealing
cord (Glass bre).
The support frame (23) must not rest on the insert or be screwed or welded to it!
5.8. Wall lining
- The lining room-side (11) must be made from non-ammable material to building ma-
terial class A1, for example brick, ceramic chips, metal and plaster.
- Beams (24) in front of the lining (11) and sup-
port frame (23) next to the open replace are
permitted at a distance of at least 1 cm, when:
- the beams are not part of the building
- the clearance to the lining (11) is open enough
that heat does not accumulate
- the beams are not in the open replace’s ra-
diation area.
- Direct fastening with heat bridges is not per-
mitted.
5.9. Decorative beams
(F) Expansion joint (24) Beam
(23) Support frame (11) Lining
5.10. Chimney lining
- The chimney lining (11) must not be in direct contact with the replace insert. It must
be self-supporting. The manufacturers oer various support frames for this purpose
(23).
5.11. Convection air supply
- The cross-section of the air inlet (14) and air outlet guide
must each be at least 700 cm².
- It must not be possible to close o at least 200 cm² of the
air inlet and air outlet opening.
- There must not be any ammable building material, e.g.
wood ceiling or furniture, within a distance of 30 cm of the
side of the air outlet and 50 cm above the air outlet (13).
40


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Morso S120 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Morso S120 in the language / languages: English as an attachment in your email.

The manual is 8,24 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info