812186
23
Zoom out
Zoom in
Previous page
1/136
Next page
23
Length Width Height
 mm  mm  mm
IMPORTANT
• IMPORTANT: Before connecting and
disconnecting Morsø Forno Spin to gas
source, make sure burner controls are in
‘OFF’ position.
• CAUTION: When the Morsø Forno Spin is
not in use, the gas cylinder must be discon-
nected.
Check that the seals between the Mor
Forno Spin and the gas cylinder are in
place and in good condition before con-
necting the gas cylinder.
Do not use the Morsø Forno Spin if it has
damaged or worn seals.
• Check performance of burner prior to use.
Do not smoke when attempting to ignite
Morsø Forno Spin.
• Never use volcanic rock, heat beads or oth-
er material.
Always use protective gloves when han-
dling hot components.
do not look into the Morsø Forno Spin when
lighting it.
Do not stand too close to the Morsø Forno
Spin when it is in operation. As it will be very
hot and give of a lot or directional heat out of
the opening of the Morsø Forno Spin.
GENERAL INFORMATION
CONNECTING & DISCONNECTING
TO GAS SOURCE
Familiarise yourself with the general information and
safety guidelines located at the front of this manual.
Check
1. Gas cylinder is lled. A sloshing sound will be heard
when shaken.
2. The burner control is in the ‘OFF’ position
Connecting
1. Ensure the valve is in the OFF position
2. Check for any damage to the cylinder connection.
3. Attach the regulator to the cylinder valve.
4. Use a soapy water solution to check the joint. If bub-
bles appear the connection will need to be retight-
ened.
Gas Knob Introduction
Gear
OFF: Fire OFF
MAX: Maximum Fire
MIN: Minimum Fire
LIGHTING INSTRUCTIONS
1. Push in the control knob and rotate it slowly conter-
clockwise until the Max position.
2. If the Morsø Forno Spin ignite successfylly please
keep pressing the control knob for ten seconds to
keep the re running.
3. If the Morsø Forno Spin does not ignite, return the
control knob back to "OFF" position and try again.
4. If the Morsø Forno Spin does not ignite after ve
attempt, leave the controll knob in the OFF position,
Check all connections and wait 5 minutes before
trying again.
IMPORTANT
Do not smoke at any time when attempting
to ignite the Morsø Forno Spin.
Do not leave the Morsø Forno Spin unat-
tended when alight.
Do not look Directly into the Morsø Forno
Spin when lighting it. Keep a safe distance.
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Morso Forno Spin at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Morso Forno Spin in the language / languages: English, German, Dutch, Danish, French, Italian, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 7.71 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info