Manual Morso 8170 (page 31 of 36) (English, Danish)

744372

Zoom out

Zoom in

1/36

Sprog

Reasons for overly rapid wear of internal parts

- Stove ﬁred too vigorously

Use of very dry wood (wood from old furniture)

- Too much soot on top of the bafﬂes (please see the section on Cleaning)

- Too much ash in the ash pan (please see the section on Ash)

Gaskets

The gaskets in the door will wear out over time, and should be replaced as required in order to

prevent runaway combustion. Use the original Morsø gasket kit.

NOTE: Normal wearing parts are not covered by Morsø’s extended warranty.

A selection of maintenance products (spare parts, glass cleaner, paint, gasket kit, etc.) is avail-

able from your Morsø dealer.

3.3 Cleaning the stove

A layer of ash and soot will form as a result of the draught in the chimney and after sweeping,

particularly on the top of the upper bafﬂe. This ash will have an insulating effect, which may

speed up the burn-through of the bafﬂes.

During normal cleaning, the bafﬂes can be removed from the stove. Once the bafﬂes have

been taken out, you can access the ﬂue chamber above the bafﬂes and clean it.

Clean the bafﬂes before reassembling them, and make sure that they are correctly assembled.

Nowadays the chimney sweep must remove the soot in the stove, in addition to sweeping the

chimney and cleaning the ﬂue pipe.

The number of annual sweepings/cleanings of the stove should be determined in consultation

with your chimney sweep.

Ash

As noted above, there should be a layer of approximately 1 cm insulating ash in the bottom of

the combustion chamber in order to achieve a high combustion temperature. If the layer of ash

is too thick, it can be brushed down into the ash pan.

Empty the ash pan before it gets completely full, so that the ash does not insulate around the

grate, and thereby speed up the burn-through.

In most cases, the ash will need to be taken away by the waste disposal company. Because

embers may be concealed in the ash pan for several days, it may be necessary to store the ash

in a container made of non-ﬂammable material before pouring it into a rubbish bag.

Ash from a wood-burning stove will not be of any beneﬁt to your garden as fertiliser. If you

have burned colour brochures, or painted or treated wood, etc., in the stove, the resulting ash

must not be poured onto soil, as it may contain heavy metals.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Morso 8170 in the language / languages: English, Danish as an attachment in your email.

The manual is 0,27 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Morso 8170

Morso 8170 User Manual - German - 20 pages

Morso 8170 Usermanual and installation guide - Dutch, French - 36 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Morso 8170 Manual

Product: