Manual Morso 7943 (page 30 of 40) (English, Danish)

744311

Zoom out

Zoom in

1/40

NO SV

N.B!

Wood is a material that contains a great deal of gas (approximately 75 %). The gases

are released when the wood is lit and heated up. For this reason, it is important that

the gases are ignited quickly after stoking. If the wood just lies smouldering, especi-

ally after re-stoking, a lot of smoke is created, which, in the worst case, may cause an

explosive ignition of the gasses, resulting in damage to the stove.

In order to ignite the gases that are released from the wood, and to keep clear, las-

ting ames during the combustion process, it is important to let in the required

quantity of oxygen (air supply) at all times. The setting of the air supply, the method

of ignition and the lighting intervals depend on the draught in the chimney, the wind

and weather, the amount of heat required, the fuel, etc. This means that it may take

some time before you get to know the correct functioning of the stove under any

given circumstances.

Although you can re your Morsø stove with almost all kinds of wood, you should

not re with wet wood, or unseasoned wood. Wood ought to be stored under a roof

for at least 1 year, and preferably 2 years, with free access to wind. Wood should be

chopped as soon as possible after felling if it is to dry quickly. The wood can be used

once the moisture content is less than 18 %. During the EN test, all stoves are tested

with wood with a moisture content of (16 ± 4)%.

Never use driftwood, as it usually has a high salt content, which damages both the

stove and the chimney. Impregnated and painted wood and chipboard emit poiso-

nous smoke and fumes, so they should not be used as fuel either.

Please note that liquid fuel may not be used in the stove.

Pieces of wood with a diameter greater than 10 cm should always be chopped.

The pieces of wood should be short enough to be able to lie at over the layer of em-

bers, with air at both ends.

The maximum length of fuel in the stove is 30 cm.

The maximum quantity of fuel is 2 kg/hour (max. 2 pieces of wood each time you

re-stoke).

The rst few times you light the stove, the re should be moderate, so that the heat-

resistant paint can harden before ring more vigorously. During the hardening pha-

se, the paint may develop obnoxious smoke and smell the rst time it is lit, which is

very normal. Make sure that the room is well ventilated during this period.

When heating up or cooling down, the material is exposed to major temperature dif-

ferences that may cause the stove to give o creaking sounds.

2.0 Firing/using the stove

When the oven door is opened, the small handle in the bottom right corner of the oven is

pressed down, thereby triggering the door locking mechanism. To avoid smoke nuisance,

always open the oven door calmly for the rst 2-3 centimeters.

Their furnace is designed with air supply in 2 places. A preheated combustion air which is

applied to the combustion at high speed over the glass and is operated by means of the

handle over the door. The combustion air is supplied when the lever is moved to the right

and closed when the lever is moved to the left. Another air supply, which is a constant pre-

heated air supply without regulating possibility, is applied to the combustion just above the

re, and helps to burn o the last gases that the wood emits during the heating.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Morso 7943 in the language / languages: English, Danish as an attachment in your email.

The manual is 2,46 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Morso 7943

Morso 7943 User Manual - German - 20 pages

Morso 7943 Usermanual and installation guide - Dutch, French - 32 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Morso 7943 Manual

Product: