744320
26
Zoom out
Zoom in
Previous page
1/40
Next page
26
NO SV
1.6 Connecting the ue pipe
Lift the upper cast iron top plate o the stove.
Note: the round cast iron cover plate in the top plate must remain mounted if the stove is
being installed with the ue pipe to the rear, but unscrewed from the upper top plate if the
ue pipe is being installed pointing upwards.
Mounting the ue collar pointing upwards
From the factory, the stove is prepared for installation with the included ue collar (1)
pointing upwards with included screws.
Mounting the ue collar to the rear
With a hammer use light, rm taps to
knock out the iron piece on the convec-
tion back panel from the small “bridges”
holding the piece in place.
The cover plate for the smoke outlet is
unscrewed from the back panel and the
xed onto the top panel.
Mount the ue collar onto the back panel
Lift the top panel back into place and the
round section which is provided can be
placed in the top panel and cover for the
blocked o smoke outlet.
The location of the bae
and cast smoke hood
The rear brick and the bae (3), which are
made from vermiculite, are mounted at
the factory.
The bae is lifted from its position and
taken out of the stove. The casted smoke
hood (2) is delivered loose in the stove
and must be attached after installation of
the stove.
The smoke hood is lifted and turned
clockwise into place so it is locked in the
two bolts at the upper ueoutlet .
Make sure that the bae and rear brick stone are correctly assembled before lighting the
stove (please see the sketch.)
Optional fresh air connection
The stove is factory prepared for installation of an optional fresh air connection inde-
pendent of the room in which the stove is installed. The box for this fresh air connection,
which can be purchased separately, enables a ø100mm pipe to be connected either to the
rear or below.
However, this does not apply to the Morsø 7848/7948 pedestal stove, Morsø 7843/7943
with drawer and wall-hung Morsø 7870/7970. The high Morsø 7893/7993 with drawer can
only be tted with fresh air at the rear.
1
2
3
A
A
A-A
Revisions
Rev.
Sign.:
Title:
Drawing no.:
1:7
Snit til vejledning
Morsø 7900 R
NRN
14.06.2012
A3
Date of print: 18-06-2020
7900-111 a
Itemno.:
This drawing is Morsø Jernstøberi A/S' property and must not be sold, lended or copied without any written authorization from the company.
Material:
Weight kg:
Model no.
Drawingtype:
Location of file:
Scale:
Format:
Released:
Construction:
Date:
Morsø 7940
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Morso 7940 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Morso 7940 in the language / languages: English, Danish as an attachment in your email.

The manual is 2,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Morso 7940

Morso 7940 User Manual - German - 20 pages

Morso 7940 Usermanual and installation guide - Dutch, French - 32 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info