Manual Morso 7110 (page 31 of 36) (English, Danish)

744349

Zoom out

Zoom in

1/36

Reasons for overly rapid wear of internal parts

- Stove red too vigorously.

- Use of very dry wood (wood from old furniture).

- Too much soot on top of the baes (please see the section on Cleaning).

- Too much ash in the ash pan (please see the section on Ash).

Gaskets

The rope gaskets in the door will need regular inspection in order to ensure and maintain

full control of your stove’s burning rate; over time the rope gaskets will harden and will be-

come less airtight; at this point you will need to remove and replace with new. Use only the

genuine Morsø gasket kit, which comes with detailed replacement instructions.

NOTE: Normal wear components (inner parts) are not covered by Morsø’s 10-year

guarantee.

Maintenance products (Spare Parts, Glass Cleaner, Paint, Gasket Kit, etc) are all available from

your authorised Morsø dealer.

3.3 Cleaning the stove

During normal use and sweeping of your stove and chimney, a layer of ash, soot or debris can form,

particularly on the top of the bae plate or inner reback. Any deposits allowed to build-up over

time will have an insulating eect on these parts, thus restricting expansion; this will ultimately result

in a shorter lifespan. The chrome-iron bae plate and bricks can easily be removed from the stove

and should be regularly checked for debris and cleaned. You must ensure that your chimney sweep

removes all soot and debris from the stove after the sweeping process.

Your chimney should be swept at least once a year; however a regular inspection of your stove-

pipe and chimney will determine whether a more frequent approach should be adopted.

Ash

In order to achieve the highest combustion temperature possible when burning solely wood,

it is important that a 1cm deep bed of ash is established on top of the grate area. Excess ash

should be removed by raking ash through the grate; surplus ash will fall into the ash pan below

the grate where it can be easily and safely removed.

Be sure to empty the ash pan before it gets completely full; if the ash level reaches the under-

side of the grate, air ow through the grate will be restricted and will lead to over-heating and

premature wear of the grate parts.

When emptying the ash pan always dump the waste ash into a metal container (dustbin)

where it can fully cool before being taken away by your refuse collector. Ash from a wood-

burning stove does not benet your garden as fertiliser.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Morso 7110 in the language / languages: English, Danish as an attachment in your email.

The manual is 0,38 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Morso 7110

Morso 7110 User Manual - English - 28 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Morso 7110 Manual

Product: