Manual Morso 7110 (page 23 of 36) (English, Danish)

744349

Zoom out

Zoom in

1/36

The cross-sectional area of the chimney (at its narrowest point) must comply with National

and Local Building Regulations. Generally, the area needed for a Morsø wood-burning stove

installation should measure at least 175 cm2 (150 mm diameter).

An over-sized chimney is generally hard to keep warm and results in poor draft. In cases where

there is an oversized masonry chimney, it is recommended that the chimney be lined using an

appropriate chimney lining system with the correct internal diameter.

With respect to the chimney termination, all chimneys should terminate in accordance with

National and Local Building Regulations.

Note that National and Local Regulations also apply with regard to the placement of chim-

neys and ues in connection with thatched roofs. See the section on Draft Conditions, 1.9.

The chimney or ue system must be equipped with access doors for inspection and clean-

ing. The size of the cleaning door in the chimney must at least equal to that of the cross-

sectional area of the chimney.

In the event that a chimney re occurs resulting from faulty operation or prolonged use

of damp wood fuel, close the air vents completely and contact your local re department

immediately.

1.6 Fluepipe connections

The stove is supplied with a factory tted ue collar (1), this is tted to the top plate and a

round cast iron blanking plate tted in the cast iron back panel behind the rear heat shield.

When required, the ue collar can be removed and relocated to the rear ue outlet. To do

this, simply knock out the round panel cut into the rear shield to reveal the cast iron blanking

plate situated behind. Untwist the blanking plate anticlockwise and remove. The ue collar

can now be clamped into position using the xing lugs attached.

The blanking plate should then be positioned onto the top ue outlet and secured into place

by pressing downwards and twisting clockwise. The blanking plate can also function as an ex-

tra clean-out access whilst perform-

ing the annual cleaning service of the

stove and chimney.

How to position the bae plates

The upper bae (3) made of vermicu-

lite are tted in the stove on delivery.

The 2 cast iron baes (1) are positioned

correctly above 2 stainless steel pipes

that provide the secondary air supply to

the combustion (see drawing).

The Insulation blanket (2) is carefully po-

sitioned above the 2 cast iron baes.

Be sure that the baes are positioned

correctly and that the insulation blan-

ket covers all of the bae before light-

ing the stove.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Morso 7110 in the language / languages: English, Danish as an attachment in your email.

The manual is 0,38 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Morso 7110

Morso 7110 User Manual - English - 28 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Morso 7110 Manual

Product: