744340
23
Zoom out
Zoom in
Previous page
1/36
Next page
23
Sprog
1.6 Connecting the flue pipe
Lift the upper cast iron top plate off the stove
Note: the round cast iron cover plate in the top plate must remain in place if the stove is being
installed with the flue pipe leading to the rear , and must be removed from the surface of the
top plate if you wish to install the flue pipe leading upwards.
The cast flue collar fits a 150 mm diameter flue pipe.
Fitting the flue collar for leading upwards.
The stove has been prepared in the factory,
for the installation of the flue collar (1) lea-
ding upwards, using the screws provided
Fitting the flue collar leading out to the
rear
If you wish to fit the stove with the flue at the
back, unscrew the sheet metal cover off the
back of the stove. This cover is then screwed
onto the inside of the stove’s top plate. The
flue collar should then be centered and
screwed firmly onto rear side of the stove.
Positioning of the smoke baffle and the
smoke hood
The Vermiculite baffle kit (3) is positioned on
reception. Take the kit out of the stove. The
cast iron smoke hood (2) which is despatc-
hed unattached inside the stove, should be
lifted up and screwed into place so that it
is centered and locks into the 2 cast forks. .
The Vermiculite baffle kit (3) should then be
positioned back into the two recesses in the
sides and pushed backwards against rear
fire brick.
Please make sure that the smoke baffles
are correctly fitted before proceeding to
light the stove.
Optional fresh air connection
The stove has been factory-prepared for installation of an optional fresh air supply indepen-
dent of the room where the stove is installed.
The supplied spigot allows for an ø100 mm pipe connection either out of the back or from the
bottom.
However, this does not apply to the wall-mounted Morsø 6670, where only the back connection
is available.
1
2
3
Revisions
Rev.
Sign.:
Title:
Drawing no.:
Dim. without indication of margin acc. to DS/ISO 2768-1 m
1:5
Godkendelsestegning
Morsø 6640 N/EN
Morsø 6600
FJN
16.06.2014
A2
Exploeded drawing
Date of print: 08-07-2014
C:\Working\6600-200 - Fuelchamber.SLDASM
6600-300
Itemno.:
This drawing is Morsø Jernstøberi A/S' property and must not be sold, lended or copied without any written authorization from the company.
Material:
Weight kg.:
Model no.
Drawingtype:
Location of file:
Scale:
Format:
Released:
Construction:
Date:
133
Morsø 6600
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Morso 6643 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Morso 6643 in the language / languages: English, Danish as an attachment in your email.

The manual is 0,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Morso 6643

Morso 6643 Usermanual and installation guide - German - 20 pages

Morso 6643 Usermanual and installation guide - Dutch, French - 40 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info