744493
9
Zoom out
Zoom in
Previous page
1/12
Next page
9
3.0 Maintenance of stove, pipe and chimney3.0 Maintenance of stove, pipe and chimney
3.0 Maintenance of stove, pipe and chimney3.0 Maintenance of stove, pipe and chimney
3.0 Maintenance of stove, pipe and chimney
In time the paint surface of the stove may become grey. This is usually attributed to
the stove being run ‘too hot’; but the stove may be freshened up by using a Morsø
Dark Grey spray paint which can be purchased from your approved Morsø dealer in
either aerosol or brush-on cans.
3.1. Exterior maintenance3.1. Exterior maintenance
3.1. Exterior maintenance3.1. Exterior maintenance
3.1. Exterior maintenance
The stove’s surface is painted with heat-resistant senotherm coating. It will retain
its optimum condition if it is just vacuumed with a soft brush attachment or wiped
with a dry dust-free cloth.
The chimney and stovepipe must be supplied with a soot door to allow for chimney
inspection and sweeping. The size of the soot door in the chimney must corre-
spond to at least the area of the internal diameter of the chimney.
3.2 Interior maintenance3.2 Interior maintenance
3.2 Interior maintenance3.2 Interior maintenance
3.2 Interior maintenance
GlassGlass
GlassGlass
Glass
When the fire is lit correctly, there will be little or no soot on the ceramic glass. It is
however quite normal for the glass to become ‘hazy’ during a long low fire (over-
night). Revitalising the fire to burn brightly will soon burn off any residue and the
glass will again become clear. If soot forms, due to misuse or poor flue draught,
this can be easily removed using Morsø glass-cleaner. The glass must however be
cold when cleaning.
Causes of sooty glass:
- Firewood too wet.
- Logs are too big/not split.
- Combustion temperature too low.
- Too much air through botto m-grate.
- Poor chimney Draught
Inner Iron parts/wearable partsInner Iron parts/wearable parts
Inner Iron parts/wearable partsInner Iron parts/wearable parts
Inner Iron parts/wearable parts
The grate system, front grate and baffle plates are all in direct contact with the fire.
They are therefore potentially vulnerable to being burnt through even though they
are manufactured in chrome-iron. Used correctly these parts will last many years. If
however the fire is used too hot and over-firing occurs, these components will have
a higher risk of burning through or warping. It is easy in this instance to replace
these parts. If the baffle plate becomes damaged and is not replaced in time, there
would be a risk that further damage could be inflicted on the stove’s top. The top
plate will be exposed to too much heat and will cause early wear and tear of the
interior parts.
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Morso 5010 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Morso 5010 in the language / languages: English as an attachment in your email.

The manual is 0,05 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info