744386
23
Zoom out
Zoom in
Previous page
1/36
Next page
23
1.6 Connecting the ue pipe
The ue collar can be rotated and be used for ø150 (inside and outside the ue collar) and
ø120 connections.
Mounting the ue collar pointing upwards
From the factory, the stove is prepared for installation with the ue collar provided (1) point-
ing upwards. The ball stop, which prevents the chimney sweep from damaging the stove’s
bae plates while sweeping, is the 128 mm long rod that is provided in the stove. The ue
collar stop bar is tted when installing the chimney.
Mounting the ue collar to the rear
Lift the top panel and convection back panel from the stove.
Remove the smoke outlet from the top outlet. The smoke outlet must not be used when
connecting the ue pipe to the rear.
Remove the round plate which is xed with 2 screws at the rear of the stove and x it in-
stead on the top outlet.
With a hammer use light, rm taps to knock out the iron piece on the convection back panel
from the small “bridges” holding the piece in place.
When connecting the flue pipe to the rear, use the
other cast smoke outlet supplied with 40 mm inser-
tion depth.
The ball stop must not be used when installing the ue
collar to the rear.
Lift the top panel and convection back panel back into
place.
A round section is provided which can be placed in the
top panel and cover for the blocked o smoke outlet.
The location of the baes
The baes (2) and (3), which are made from vermicu-
lite, are mounted on delivery.
Make sure that the baes are correctly assembled be-
fore lighting the stove (please see the sketch).
Fresh air connection, if required
Downwards:
The stove is tted ex works with a branch piece under
the stove for fresh air connection, if required.
Rearwards:
Lift the top plate and convection back panel o the stove and
remove the branch piece under the stove. Remove the round
plate tted with two screws at the bottom at the back of the
stove and, instead, attach it where the branch piece was pre-
viously tted under the stove. Re-t the branch pipe where
the round plate was previously tted at the back of the stove.
The iron piece at the bottom of the convection back panel is
knocked out with light, rm taps with a hammer next to the
small ”bridges” holding the piece in place. Lift the convection
back panel and top plate back into place.
B
B
B-B
1
2
3
Revisions
Rev.
Sign.:
Title:
Drawing no.:
1:5
Snit til vejledning
Morsø S10-40
RSV
25.08.2010
A4
Date of print: 24-11-2010
U:\udv\Tegninger\Pladejernsovne 2010\S10-40\S10-40.SLDASM
S10-06 a
Itemno.:
This drawing is Morsø Jernstøberi A/S' property and must not be sold, lended or copied without any written authorization from the company.
Material:
Weight:
Model no.
Drawingtype:
Location of file:
Scale:
Format:
Released:
Construction:
Date:
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Morso 4043 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Morso 4043 in the language / languages: English, Danish as an attachment in your email.

The manual is 2,92 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Morso 4043

Morso 4043 User Manual - German - 20 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info