744488
10
Zoom out
Zoom in
Previous page
1/12
Next page
10
Causes of early wear and tear of interior parts:
- fire too hot. Too much air through the bottom-grate. Use of too much dry wood
(wood from discarded furniture).
- Too much soot above on top of the baffle (see section on cleaning).
- Too much ash in the pan (see section on ash).
Dormant periods of useDormant periods of use
Dormant periods of useDormant periods of use
Dormant periods of use
During long periods where the stove is not in use it is essential that all of the air
intakes on the stoves are fully opened and that the door(s) are kept ajar. This will
help vent the stove and chimney and prevent condensation and the resulting cor-
rosion from occurring within the stove.
GasketsGaskets
GasketsGaskets
Gaskets
In the course of time, the gaskets to the doors and in the lid will wear and in order
to maintain control of the stove, they ought to be replaced where necessary. Only
use Morsø gasket kit.
Note: Normal wear and tear is not covered by Morsø’s product guarantee.
Maintenance kits (Spare parts, Glass cleaner, Paint, Gasket kit etc) can all be ob-
tained from your local Morsø dealer.
3.3 Cleaning your stove3.3 Cleaning your stove
3.3 Cleaning your stove3.3 Cleaning your stove
3.3 Cleaning your stove
Layers of ash and soot can form on top of the baffle plate, not only after sweeping
but also as a result of poor flue draught during general use. The accumulated ash
will have an insulating effect on the baffle and could accelerate burn-through of
the plate itself, therefore regular cleaning is essential. Most chimney sweeps will
perform this procedure during the annual/bi-annual chimney sweep.
AshAsh
AshAsh
Ash
For wood burning only, a 1-2 cm layers of ash should be established in the bottom
of the firebox in order to achieve a high combustion temperature. When the layer of
ash is too thick, you should push & pull the shaking lever to clear some ash into
the ash pan below.
Empty the pan before it is completely full in order that the ash does not insulate
around the grating since this can accelerate burn-through of the grate.
Normally, the ash should be disposed of into a metal bin where it can cool down
ready for disposal with your refuse. Ash from a woodburning stove is of no benefit
as fertiliser for your garden. If coloured brochures, painted and impregnated wood
or anything similar have been burnt in the stove, you should not pour the ash onto
the ground as it may contain heavy metals.
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Morso 3110 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Morso 3110 in the language / languages: English as an attachment in your email.

The manual is 0,05 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Morso 3110

Morso 3110 Usermanual and installation guide - German - 11 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info