Manual Morso 2B Classic (page 34 of 36) (English, Danish)

744319

Zoom out

Zoom in

1/36

DK ENG

Reasons for overly rapid wear of internal parts

- Stove red too vigorously.

- Too little air passing through the bottom grate.

- Use of very dry wood (wood from old furniture).

- Excessive debris collection on bae plate or inner reback (see section on cleaning)

- Ash level too high in the ash pan (see section on ash).

will naturally shorten the lifespan. The aforementioned parts are all easily replaced. If the

bae plate is damaged or warped and is not replaced in time, the top plate could become

subject to excessively high temperatures, which may lead to damage here also.

Note that no unauthorised alterations to the stove design should be undertaken, and al-

ways ensure that any replacement parts purchased must be Morsø original parts.

Gaskets

The rope gaskets in the door will need regular inspection in order to ensure and maintain

full control of your stove’s burning rate; over time the rope gaskets will harden and will be-

come less airtight, at this point you will need to remove and replace with new. Use only the

genuine Morsø gasket kit, which comes with detailed replacement instructions.

NOTE: Normal wear components (inner parts) are not covered by Morsø’s extended

guarantee.

Maintenance products (Spare Parts, Glass Cleaner, Paint, Gasket Kit, etc) are all available from

your authorised Morsø dealer.

3.3 Cleaning the stove

During normal use and sweeping of your stove and chimney, a layer of ash, soot or debris can

form, particularly on the top of the bae plate or inner reback. Any deposits allowed to build-

up over time will have an insulating eect on these parts, thus restricting expansion; this ulti-

mately result in a shorter lifespan. The bae plate can easily be removed from the stove and

should be regularly checked for debris and cleaned. You must ensure that your chimney sweep

removes all soot and debris from the stove after the sweeping process.

Your chimney should be swept at least once a year; however a regular inspection of your

stovepipe and chimney will determine whether a more frequent approach should be adopt-

ed.

Ash

As noted above, there should be a layer of approximately 1 cm insulating ash in the bottom

of the combustion chamber in order to achieve a high combustion temperature. If the layer

of ash is too thick, it can be brushed down with an ash shovel, dustpan or similar tool.

Be sure to empty the ash pan before it gets completely full; if the ash level reaches the under-

side of the grate, air ow through the grate will be restricted and will lead to over-heating and

premature wear of the grate parts.

In most cases, the ash will need to be taken away by the waste disposal company. Because

embers may be concealed in the ash pan for several days, it may be necessary to store the

ash in a container made of non-ammable material before pouring it into a rubbish bag.

Ash from a wood-burning stove will not be of any benet to your garden as fertiliser. If you

have burned colour brochures, or painted or treated wood, etc., in the stove, the resulting

ash must not be poured onto soil, as it may contain heavy metals.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Morso 2B Classic in the language / languages: English, Danish as an attachment in your email.

The manual is 0,46 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Morso 2B Classic

Morso 2B Classic Usermanual and installation guide - German - 16 pages

Morso 2B Classic Usermanual and installation guide - Dutch, French - 32 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Morso 2B Classic Manual

Product: