744490
4
Zoom out
Zoom in
Previous page
1/12
Next page
4
Stove typeStove type
Stove typeStove type
Stove type
Back of stove (A) Sides of stove (B) Distance to Furniture Back of stove (A) Sides of stove (B) Distance to Furniture
Back of stove (A) Sides of stove (B) Distance to Furniture Back of stove (A) Sides of stove (B) Distance to Furniture
Back of stove (A) Sides of stove (B) Distance to Furniture
Morsø 2110 150 mm 500 mm 850 mm
Morsø 2130 150 mm 500 mm 850 mm
Morsø 2140 150 mm 200 mm 800 mm
Morsø 3410 350 mm 600 mm 800 mm
Morsø 3440 350 mm 300 mm 800 mm
Morsø 3450 350 mm 600 mm 800 mm
Morsø 3610 350 mm 600 mm 800 mm
Morsø 4600 150 mm 250 mm 800 mm
Morsø 4640 150 mm 250 mm 800 mm
Morsø 5010 350 mm 600 mm 800 mm
In brick-recess situations we recommend that the stove be fitted with a gap all
around of between 10-15 cm to allow for heat circulation purposes. It also makes
for easier maintenance of the external parts.
Hearth RequirementsHearth Requirements
Hearth RequirementsHearth Requirements
Hearth Requirements
Please refer to Building Regulations regarding thickness and area of the hearth
required.
Clearances to FurnitureClearances to Furniture
Clearances to FurnitureClearances to Furniture
Clearances to Furniture
The clearance to any furniture should be minimum of 80 cm, however, it is also
necessary to assess whether the furniture or anything else close by will be effected
by the warmth i.e. dried out.
The distance to any combustible material in front of the stove is minimum 60cm.
1.5 The chimney1.5 The chimney
1.5 The chimney1.5 The chimney
1.5 The chimney
The stove must never be connected to a chimney that is shared with another appli-
ance. A modern and efficient stove makes a lot of demands on a chimney. Ask the
chimney sweep to assess the chimney.
The chimney’s internal diameter must be minimum 175 cm² (150 mm in diameter)
and preferably not larger. A chimney with an excessively large area may struggle to
establish a good draught. If the chimney is of a masonry construction with a larger
internal diameter it is recommended that a chimney liner be fitted. In this way the
flue is reduced and an increased draught is achieved increasing fuel efficiency.
1.6 Stovepipe connection1.6 Stovepipe connection
1.6 Stovepipe connection1.6 Stovepipe connection
1.6 Stovepipe connection
The standard stove is fitted with a reversible flue collar (3). If a rear flue outlet is
required simply fit the supplied cast iron blanking plate onto the top outlet, fitting
the flue collar onto the back. For a top flue outlet, simply reverse the procedure.
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Morso 2130 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Morso 2130 in the language / languages: English as an attachment in your email.

The manual is 0,05 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info