744290
31
Zoom out
Zoom in
Previous page
1/36
Next page
31
Reasons for overly rapid wear of internal parts
- Stove red too vigorously.
- Too much air coming through the bottom grate.
- Use of very dry wood (wood from old furniture).
- Too much soot on top of the baes (please see the section on Cleaning).
- Too much ash in the ash pan (please see the section on Ash).
Gaskets
The gaskets in the door will wear out over time and should be replaced as required in order
to prevent runaway combustion. Use the original Morsø gasket kit which comes with de-
tailed replacement instructions.
Note: Normal wearing parts are not covered by Morsø’s extended warranty.
A selection of maintenance products (spare parts, glass cleaner, paint, gasket kit, etc.) is avail-
able from your Morsø dealer.
3.3 Cleaning the stove
A layer of ash and soot will form as a result of the draught in the chimney and after sweep-
ing, particularly on the bae. This ash will have an insulating eect which may speed up the
burn-through of the bae as it cannot get rid of the heat. Nowadays, the chimney sweep
must remove the soot in the stove, in addition to sweeping the chimney and cleaning the
ue pipe.
The number of annual sweepings/cleanings of the stove should be determined in consulta-
tion with your chimney sweep.
Ash
As noted above, there should be a layer of approx. 1 cm insulating ash in the bottom of the
combustion chamber in order to achieve a high combustion temperature. If the layer of ash
is too thick, it can be shaken down into the ash pan.
Empty the ash pan before it gets completely full so that ash does not insulate around the
grate, and thereby speed up the burn-through.
In most cases, the ash will need to be taken away by the waste disposal company. Because
embers may be concealed in the ash pan for several days, it may be necessary to store the
ash in a container made of non-ammable material before pouring it into a rubbish bag.
Ash from a wood-burning stove will not be of any benet to your garden as fertiliser. If you
have burned colour brochures, or painted or treated wood, etc., in the stove, the resulting
ash must not be poured onto soil as it may contain heavy metals.
31


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Morso 1126 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Morso 1126 in the language / languages: English, Danish as an attachment in your email.

The manual is 0,39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Morso 1126

Morso 1126 Usermanual and installation guide - German - 16 pages

Morso 1126 Usermanual and installation guide - Dutch, French - 32 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info