588260
9
Zoom out
Zoom in
Previous page
1/84
Next page
Features
1 Start / Stop Button
Starts and pauses the heating process. Can also be used
to pause dispense while in progress and put the Hot Water
Dispenser into standby mode.
2 Water Volume Dial
Controls the volume of water to be heated and
dispensed. Volume is displayed on the LCD screen (15).
3 LCD Screen
Displays volumes, temperatures, functions, and warnings.
4 Temperature Button
Adjusts the temperature of dispensed water, turns sounds on
and off.
5 Dispense Button
Switches the Auto Dispense feature on and off.
6 Dispense Nozzles
7 Water tank
Contains the BRITA MAXTRA Cartridge 19, BRITA Memo 20 and
BRITA Hopper 21.
8 Drip Tray
9 Drip Tray Cover
10 Drip Tray Indicator
‘Full’ icon indicates when the Drip Tray needs to be emptied.
11 Heat Icon
Displays when the heat cycle is in process.
12 Water Tank Icon
Displays when the tank needs to be refilled.
13 Dispense Icon
Displays when water is ready for dispense.
14 Auto Dispense Icon
Displays when the auto dispense feature is enabled.
15 Dispense Volume Display
Displays the volume of water to be heated and
dispensed.
16 Descale Icon
Displays when the Hot Water Dispenser requires
descaling.
17 Temperature Icon
Displays the temperature the water will be heated to prior to
dispense.
18 Standby Light
19 BRITA MAXTRA Cartridge
20 BRITA MEMO
Monitors the life of the MAXTRA Cartridge.
21 BRITA Hopper
22 Water Level Sensor
23 Main Unit
Using the Hot Water
Dispenser
Before using your Hot Water Dispenser, or if it
has not been used for over a week, follow these
instructions to boil the maximum amount of water,
then discard to ensure the system is flushed
through.
The following instructions detail the steps to
follow to use your Hot Water Dispenser. For Installation of
the BRITA Filtration system see 'Installing a BRITA MAXTRA
Cartridge'.
Filtering water through the BRITA Maxtra
Cartridge takes around 4 minutes for 1.5L. Ensure enough
water has been filtered and is ready for use in the water tank
before heating.
3 If required, follow steps of 1-6 of ‘Resetting the system’
to reset the system and then discard the water. If the Hot
Water Dispenser is in standby mode, press any button to
wake.
4 Pull out the Drip Tray (8) from the Main Unit (23)
(if needed).
5 Place the required vessel (cup, pan, pot etc.) under the
Dispense Nozzles (6). One or two vessels can be filled
at the same time during each dispense cycle, provided
they are the same size.
6 Adjust the temperature of the water by pressing the
Temperature Button (4) to cycle through the
options (85,95 & 100°C). The water temperature will be
displayed on the screen (17).
7 Turn the Water Volume Dial (2) to adjust the Dispense
Volume (15). Your Hot Water Dispenser can heat between
150ml to 1.5L of water per cycle.
8 You can automatically dispense volumes of water at
600ml and below. To turn this feature on or off, press the
Dispense Button (5). This function cannot be selected for
volumes over 600ml. These must be dispensed manually.
9 Press the Start / Stop Button (1) to begin heating. Your
Hot Water Dispenser will sound and the heat cycle will
begin. Once started, the volume and
temperature can only be changed during the first few
seconds of the heating cycle.
10 Once ready your Hot Water Dispenser will sound.
The hot water will be dispensed automatically. If the
manual dispense function has been selected, press the
Dispense Button (5) to begin dispensing.
g
f
d
e
i
q
t
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Morphy Richards Redefine at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Morphy Richards Redefine in the language / languages: English, German, Danish, French, Italian, Turkish, Spanish as an attachment in your email.

The manual is 4,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info