Manual Morphy Richards BM 48271 Accents (page 10 of 40) (English)

458139

Zoom out

Zoom in

1/40

Once you have selected

programme 12 from the MENU:

a) Touch the HOMEMADE button

once, KNEAD 1 will appear on the

LCD display, then touch the TIME

button to adjust the minutes, and

then touch the HOMEMADE button

to confirm the time for this step.

b) Touch the HOMEMADE button to

enter the next step, RISE 1 will

appear on LCD display, then touch

the TIME button to adjust minutes,

the number will increase quickly

once you hold the TIME button. The

time will only increase in minutes. To

decrease the amount of minutes,

touch the TIME button until you

reach the MAX time, then touch the

TIME button again to return to “0”.

You can then touch the TIME button

to increase to the required time.

Touch the HOMEMADE button to

confirm the time for this step.

c) Following the same method as for

the KNEAD 1 and RISE 1, set the

remaining steps. Upon finishing

setting all; the steps, touch the

START/STOP button to exit the

setting.

d) Touch Start/stop button again to

activate the operation.

NOTE: The setting can be

memorised and ready for the next

time you use the breadmaker.

Start/stop

For starting and stopping the

selected baking programme.

To start a programme, touch the

START/STOP button once. A short

beep will be heard and the two dots

in the time display begin to flash and

programme starts. Any other button

is inactivated except the

START/STOP, LIGHT and PAUSE

buttons after a programme has

switched off. This feature will help to

prevent any unintentional disruption

to the operation of programme.

To stop the programme, touch the

START/STOP button for 2 seconds,

a beep will sound to confirm.

Time

Use the timer when you want the

bread to be ready later or in the

morning. A maximum of 13 hours

can be set. Check if this function is

available by looking at “Baking cycle

times’ on page 30 for further

instructions.

Pause

After the baking cycle starts, you

can touch the PAUSE button to

interrupt the process at any time.

The operation will be paused but

the setting will be memorised, the

outstanding time will be flashed on

the LCD. Touch the PAUSE button

again and the programme will

continue.

Memory

If the power supply has been

interrupted during the course of

making bread, the process of

making bread will be continued

automatically within 10 minutes,

without touching the STOP/START

button . If the interruption time

exceeds 10 minutes, the memory

cannot be kept, you must discard

the ingredients into the baking pan

and add the ingredients into the

baking pan again, and the

breadmaker must be restarted. But

if the dough has not entered the

rising phase when the power supply

breaks off, you can’t touch the

START/STOP button directly to

continue the programme from the

beginning.

Keep warm

Bread can be automatically kept

warm for 1 hour after baking. Hot air

will be circulated to keep it warm.

The function can be used on most

settings (See ‘Baking cycle times’

section). During keeping warm, if

you would like to take the bread out,

switch the programme off by

touching the START/STOP button

BM48271 Rev2 18/7/07 16:32 Page 10

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Morphy Richards BM 48271 Accents in the language / languages: English as an attachment in your email.

The manual is 0,87 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Morphy Richards BM 48271 Accents Manual

Product: