This function is ideal for cleaning stairs,
curtains, upholstery and hard to reach places.
1To separate the handheld vacuum cleaner (12)
from the main vacuum cleaner body (7), press
the handheld vacuum cleaner release button
(8).
2Pull the handheld vacuum cleaner away from
the main vacuum cleaner body (7).
•After use, return the handheld vacuum cleaner
(12) to the cavity on the main vacuum cleaner
body (7) by firstly sliding the suction end into
place over the suction hole in the main vacuum
cleaner body cavity, then push the handle end
in to place until a click is heard.
•The handheld vacuum cleaner only has a high
power mode, not variable power.
Using in upright mode (continued)
Turn the motorised floor brush (19) over to
inspect the brush bar.
Using a coin, turn the locking button on the
brush bar cover anti-clockwise from the
position to the position.
Remove the brush bar cover and lift the brush bar
out. Pull away any hairs or fibres from the brush
bar. If they are tightly wound around the brush,
carefully snip the fibres with scissors, being careful
not to damage the rotating brush bar, pull away
from the rotating brush bar and dispose of. Replace
the brush bar and cover in their original position.
